connect front panel wires

Intel / S875wp1-e
December 5, 2009 at 12:13:34
Specs: Windows XP
need to find out the correct order of the front pannel wires and the pin location. A photo woud be great. It is intel s875wp1-e mobo.

See More: connect front panel wires

Report •

December 5, 2009 at 13:16:11
C'mon! You didn't even look for that information? 55-56.


Report •

December 5, 2009 at 15:18:17
I did look and download the info. The problem is that this is my first and I'm not sure of the pin direction as to how they are numbered. I have tried both directions and still nothing happens when I hit power.

Report •

December 5, 2009 at 15:33:15
There should be labeling on the printed circuit board itself and the case wires should also have labeling on them.

Report •

Related Solutions

December 5, 2009 at 15:58:11
"I have tried both directions and still nothing happens when I hit power"

The power button connector has no direction...either way will work. Maybe you have something else wrong, like a faulty power supply?

Report •

December 5, 2009 at 17:09:54
I have power light on the board lit but nothing rus at all not even fans.

Report •

December 6, 2009 at 11:34:59
Power supplies do not usually fail "Totally". They contain several circuits that can fail independantly, each with the same result, NO BOOT.

Find a PSU that is KNOWN to be good, or have your PSU tested at a Rpair shop.

There is nothing to learn from someone who already agrees with you.

Report •

December 6, 2009 at 11:58:43
If you just installed that motherboard into your case you should have bench tested it first.

Is the board new or used?

Are you sure the CPU you installed is compatible?

Do you have the Auxiliary power connector plugged in directly to the board?

None of the case to board wiring is needed to run the board.

Simply shorting out the two PWR pins should start the board without any wiring connected to THAT header.

Supply the model of your processor, RAM and the model number of your power supply.

Report •

Ask Question