Computer won't boot after BIOS overclocking

Intel Core 2 quad q9650 quad core proces...
December 18, 2009 at 13:53:38
Specs: Windows 7, Q9650@3.95ghz 4 gb ddr3
Just been playing with my bios to get some additional
overclock results. Now when I turn the computer on my
monitor recieves no signal. I just increased voltage to
CPU at 1.38v on aftermarket high end air cooler with
fsb set at 442. I have taken battery off motherboard to
reset but still same problem.

See More: Computer wont boot after BIOS overclocking

Report •


#1
December 18, 2009 at 14:11:13
Are you getting any other signs of life?

Are you using on board or add in video?


Report •

#2
December 19, 2009 at 04:20:54
Keyboard and mouse light up. Ati 5970 gpu

Report •

#3
December 19, 2009 at 20:40:33
Removing the battery isn't usually the best way to clear the cmos as sufficient charge can be maintained for quite a while. Try to locate a 'clear cmos' jumper on the motherboard.

Bah, humbug


Report •

Related Solutions

#4
December 19, 2009 at 20:42:27
If you had the computer off but still plugged in you didn't clear the CMOS. After clearing the CMOS you must immediately boot into the BIOS and reset values as needed then save upon exit (F10).

Report •

#5
December 20, 2009 at 01:22:15
Why overclock your system, your pc is capable of playing any games in ultra high with stock settings.

Report •

#6
December 20, 2009 at 06:14:27
Looks like the OP is in the wind.

Report •


Ask Question