Solved cant open bios help

March 18, 2017 at 20:26:25
Specs: none
ok so its my first time building a pc and i am useing an old monitor and it does not have hdmi so i only used vga but it says no input

See More: cant open bios help

Reply ↓  Report •


✔ Best Answer
March 19, 2017 at 06:00:54
If you're going to use the motherboard graphics port, you have to remove the video card. Are you in the bench-testing phase or did you install everything in the case without testing it 1st?

http://www.techsupportforum.com/190...



#1
March 18, 2017 at 21:06:37
So, how do you have the monitor connected? What port, cable, adapters if any?

Reply ↓  Report •

#2
March 18, 2017 at 21:29:12
I assume you have some knowledge about the hardware?
Any specs of the components you used?
Are you using the on board Graphic Processor unit (GPU)? Or a GPU extension board?

Reply ↓  Report •

#3
March 18, 2017 at 23:03:51

cpu Processor – Intel Core i5-6400

Motherboard – ASUS PRIME B250M-K LGA1151 M.2 mATX Motherboard

gpu Video Card – ASUS Radeon Rx 480 4GB OC

RAM – Crucial 8GB DDR4 Single

500Power Supply – EVGA 500W

Hard Drive – Seagate 1TB

asus CD Drive – Asus 24x DVD-RW

oh and also my fans are spinning but the screen says no input


Reply ↓  Report •

Related Solutions

#4
March 18, 2017 at 23:06:33
i have the vga connected to the mother board not the gpu becuase it has no vga port, for now i wil use the motherboard but in a couple of days ime getting a vga adapter

Reply ↓  Report •

#5
March 18, 2017 at 23:43:36
Did you remove the Video card when you use the Motherboard video?
Make sure you disconnect the AC before doing anything to the hardware!

A reset of the CMOS/BIOS sometimes solves POST problems.

message edited by sluc


Reply ↓  Report •

#6
March 19, 2017 at 06:00:54
✔ Best Answer
If you're going to use the motherboard graphics port, you have to remove the video card. Are you in the bench-testing phase or did you install everything in the case without testing it 1st?

http://www.techsupportforum.com/190...


Reply ↓  Report •

#7
March 19, 2017 at 07:10:19
oh thx it works now

Reply ↓  Report •

Ask Question