Canon ir3300 ImageCopier stopped printing

Canon / Ir 3300 image copier
April 18, 2010 at 07:04:06
Specs: Windows XP
hi experts..
i have canon ir3300 imagecopier.. all of sudden it
stopped working.. i cannot fine any solution for it..
i have installed drivers perfectly.... can anyone
sort it out

See More: Canon ir3300 ImageCopier stopped printing

April 18, 2010 at 12:40:06
You have not supplied enough information.

If the software for it was working properly in Windows XP previously, it's extremely unlikely there's anything wrong with that, if you have not re-installed Windows since the unit last worked properly.

Did you attempt to re-install it's software?

If you attempted to re-install the software for it, people often DO NOT do that correctly.

"canon ir3300 imagecopier"

There's no such thing.

It's a
- canon ir3300 IMAGERUNNER Digital Copier
- canon ir3300 Digital Copier
- canon ir3300 copier

canon ir3300 support

"The iR3300 is a fully multifunctional, digital, system offering 33 A4 ppm plus Copy, Print, Scan and Fax functionality."


"Imaging System
Laser dry electrostatic transfer system"

So it's a black and white laser model.

Is it out of toner?

Software for ir3300 - set it to Windows XP, English

No manuals there.

Do you have a manual for this ? If so, READ IT !

Are you getting error codes?
Troubleshooting ir3300 problems - 123 "hits"


Click on
Free User

The download is a*.rar achive file.

If you don't have anything on your computer that can extract the contents, search on the web for: open .rar files , or similar, download a prgram, install it, then you'll be able to extract the manual from the *.rar file.

On the download page for that...
Anonymous said...

The cover of the manual says

"Service Manual

and not "iR3300"

The same service manual apparently applies to several models.

Manuals also available from here, but you may have to wait a while until the download is available:

iR3300 English Service Manual iR2200, iR2800, iR3300 \Canon\ALL\iR2200^iR2800^iR3300_esm_FY8-13H8-000.pdf Id-Canon-FY8-13H8-000

iR3300 English Service Handbook iR2200, iR2800, iR3300 \Canon\ALL\iR2200^iR2800^iR3300_sh_FY8-23BD-000.pdf Id-Canon-FY8-23BD-000

iR3300 English Network Guide iR2200, iR2800, iR3300 \Canon\ALL\iR2200^iR2800^iR3300_Network=Guide_798-16-05.pdf Id-Canon-798-16-05

iR3300 English New Product Information iR2200, iR2800, iR3300 \Canon\ALL\iR2200^iR2800^iR3300_New=Product=Information_584-11-93.pdf Id-Canon-584-11-93

iR3300 English Parts Catalog iR2200, iR2800, iR3300 \Canon\ALL\iR2200^iR2800^iR3300_epc_FY8-31FC-000.pdf Id-Canon-FY8-31FC-000

Scroll down to Get Your Manual in red on the left, click on Go

Report •

April 19, 2010 at 21:11:01
sorry.. everything is fine with the system.. i have reinstalled
drivers of ir3300... thrice... changed the data cable too... hard
disk of ir3300 is also fine.. i tested it too... still cant resolve the

Report •

April 20, 2010 at 22:02:21
You haven't said whether you got/get any error codes, what your specific symptoms are, whether you have checked for no toner, a paper jam, etc., or whether you have consulted the service manual or user manual.

I found no info about how this is connected to the computer.
If it's connected via a USB connection, see this:
Troubleshooting USB device problems
See Response 1:

Your unit requires at least a medium amount of current be available from the USB port it is plugged into, it not the full max spec 500ma.
I have seen a few instances where a multifunction unit will NOT work properly when plugged into a hub or the front ports on desktop computer, and one instance where the desktop computer had an IRQ sharing problem that affected only the mutifunction unit.

Unless the instructions for installing a device tell you otherwise.......
You DO NOT install drivers for a device while booting into Windows, if the software for the device has not been installed yet - when Windows detects a generic device or New Hardware while booting, you allow it to search for drivers, it doesn't find any, and it wants you to show it the location of the drivers - CANCEL that, continue on to the desktop, and install the software for the device using the proper installation from a CD or the proper installation file that you downloaded from the web.

If you DID install drivers that way, go to Control Panel - Classic View - Add/Remove Programs and Un-install the software you installed, reboot, DO NOT install drivers while booting, and install the software the right way !

The same applies no matter when Windows finds New Hardware !

If the device is USB connected, you are often NOT supposed to plug in the USB connection to it until the software for it has been installed - you may be prompted to plug it in during the software installation, but it should not be plugged in before that.

Un-install the software for it BEFORE you install it again.

Report •
Related Solutions

Ask Question