bios corruption failure hp 630 notebook pc

January 12, 2012 at 02:15:51
Specs: Windows 7 ultimate
just updated bios and when the machine restarted, what came out was a black blank screen with capslock blinking the 2 signal LED error code. as of now, all devices are working except the screen. we've done the power off press, cmos reset, memory reseat, cleaned everything, and flashdrive recovery of bios but were all useless.

See More: bios corruption failure hp 630 notebook pc

Report •

#1
January 12, 2012 at 10:02:25
Did you enter the BIOS after the update to reset values?

Why did you update the BIOS in the first place?


Report •

#2
January 12, 2012 at 10:14:15
Dunno why people flash bios's all the time. Don't do that again.

1/3 of highway deaths are caused by drunks. The rest are by people who can't drive any better than a drunk.


Report •

#3
January 12, 2012 at 18:48:56
You'll need to contact a professional BIOS repair facility such as AQSTECH.com

Report •

Related Solutions

#4
January 12, 2012 at 19:10:20
It says this is a NOTEBOOK!!! What could you possibly expected to accomplish by flashing the BIOS of a notebook computer??? Updating the BIOS should ONLY be done when the update will actually solve a serious problem or is needed to allow you to run a newer CPU and the newest update supports this.
Did you make ABSOLUTELY sure that you were using the EXACT BIOS version for your EXACT model and version?
Did you make sure the battery was FULLY charged AND the power cord was plugged in???
Did you try 'Updating' the BIOS back to the original version (doesn't often work, but always worth a try at this stage)?
Dig a hole in the back yard and start playing taps....

You have to be a little bit crazy to keep you from going insane.


Report •

#5
January 25, 2012 at 03:12:41
i did not enter the BIOS after the update to reset values.

i updated the BIOS in the first place 'coz it was required by a certain program that i was downloading then..


Report •

#6
January 25, 2012 at 03:13:51
due to request and/or required by certain programs.

Report •

#7
January 25, 2012 at 03:15:32
thanks, hope this'll work..

Report •

#8
January 25, 2012 at 03:23:09
Thanks, but they don't seem to have an outlet here in the Philippines..

Report •

#9
January 25, 2012 at 03:29:52
If an application I was downloading of the Internet told me that I needed to update the BIOS to make it work would set alarm bells ringing. Windows applications should have nothing to do with the BIOS, they should only interact with the Operating System. Windows should do all the BIOS interacting that is needed.

I would be very dubious of this application that feels the need to by-pass Windows and go directly to the BIOS, especially if the computer was working fine beforehand.

Stuart


Report •

Ask Question