Solved Asus high speed hub

October 11, 2017 at 03:59:50
Specs: Windows 8
Hi guys,

my first time here!..hope you guys can assist me. I have an Asus P5G41T-M LX motherboard, and it's playing up. I am trying run usb device but the pc tells me this device may not run because it needs to be plugged into a high speed hub. Now, I have checked the 4 usb's and they are USB 2.0. In my opinion, this falls under the category of high speed hubs. What am I missing? The pc will not start the device.

See More: Asus high speed hub

Report •

October 11, 2017 at 10:24:04
✔ Best Answer
A USB hub is an external device that connects to a USB port. Some are powered, some are not. Here's an example of a powered hub:

According to your motherboard specs, the board has "8 USB 2.0/1.1 ports (4 ports at mid-board, 4 ports at back panel) ".

What is the device you're trying to connect? Did you install the USB drivers?

Report •

October 12, 2017 at 00:58:49

I am trying to connect my v2pc device. I want to convert old videos to disc. Yes all drivers for this device had been installed, but when I go into the menu and click to record, the error comes up. I used to use this device before on previous pc's...

USB drivers?...I thought that came with the operating system?..The usb's work otherwise, so I did not think I needed drivers for them?..

Report •

October 13, 2017 at 00:24:36
Hi riider,

Alright, I feel like an idiot!..The error message i got from windows XP was that the device will work better if connected to a high speed port, and not HUB,as I originally thought. I do have a high speed hub,but that did not prove to be the problem. This is what happened:..I removed the program from the pc, and reconnected the device, expecting XP to prompt it has found new hardware. But nothing happened. So I installed the driver again manually. After that I installed the software. On trying to use the device, I got the famous code 10 error...this was not from XP but from the device software itself. I went to device manager, located the device and saw the yellow exlamation mark, so I deleted the device, removed everything again from the pc and started all over again. Still the pc did not prompt, "Found new hardware", so I decided to go to Device manager and found to my surprise, the device still there!!. I right clicked and got info that the driver for this device was installed and working fine...How this could be, I didn't know, and still don't. anyways, I re-installed the software and found everything to be working fine... Thank you for your assistance and also please accept my apology for the mis-interpretation of "HUB"/"PORT"..

Report •

Related Solutions

October 13, 2017 at 04:14:55
The important part is that you got it running. This post may help some others with a similar problem some day.

You have to be a little bit crazy to keep you from going insane.

Report •

Ask Question