Are these parts compatible. please help

Report •


#1
December 8, 2009 at 16:21:29
"how is this build for gaming"

It sucks! The HD4650 is a $40 card...that's all it's worth! It doesn't get any better just because you pay more for it! Do you have any idea what you're doing?

http://www.newegg.com/Product/Produ...


And stop double & triple posting!!!!!


Report •

#2
December 8, 2009 at 16:38:00
Hey, I never said your first MBoard choice was bad. Just was asking if you intended to use 2 graphics cards.

Some versions of that basic chipset support hybrid Crossfire, which is on board and an add in card.

Generally speaking 2 middle of the road cards are not as good as 1 good card.

The PSU has 50A on the 12V rail, which should be more than enough for that setup.

That RAM isn't listing on the Recommended list. look at the link below. RAM is also specified to run at 1.8V which is much higher than the standard at 1.5V. Download the manual for that board and see what voltage setting options are available.

I'm not an expert on graphic card as I don't game. I recommend you start a new thread after a while asking for advice on ATI graphics cards. Indicate what you intend to do with the card.

http://www.gigabyte-usa.com/FileLis...

http://www.gigabyte-usa.com/Product...


Report •

#3
December 8, 2009 at 16:44:57
that graphics card was the wrong post, this is the one i was going to link http://www.newegg.com/Product/Produ...

Report •

Related Solutions

#4
December 8, 2009 at 16:51:29
ok i found ram that i think is compatible http://www.newegg.com/Product/Produ...

Report •

#5
December 8, 2009 at 17:41:37
Dude, you're posting a link to an HD4650 for $166. The HD4650 is a low end card that generally sells for about $40. All you'd be doing is spending $126 too much for a low end card. The $166 HD4650 is no better or faster than the $40 HD4650.

And Mr Moderator, why are you allowing 3 posts about the same topic? ;-)


Report •

#6
December 8, 2009 at 17:47:22
From what I've read on your posts, it doesn't seem like you should be attempting a build. We all have to learn somewhere, I agree, but if you don't know components, how are you going to build a machine. I'm not putting you down, but I think you should buy a pre built machine. Yes, you can build one cheaper, but if you mess it up and fry components, it will be cheaper in the long run to buy one. Good Luck to you, really........

Report •

#7
December 8, 2009 at 18:48:55
jam

I removed the first thread. The second one is different hardware and I did respond to it.


Report •

#8
December 8, 2009 at 21:45:51
Just yanking your chain ;-)

Report •

#9
December 8, 2009 at 22:09:10
@Otherhill
i didn't know that you are moderator

@flutch
i agree with otherhill about ram and board(look for any good review board with amd chipset 790gx,790fx,790x,785g). I agree with jam about graphic card(look for hd 4870 1gb cost $154), hi grasshopper i use the same method you mentioned to learn pc components.


Report •

#10
December 9, 2009 at 05:23:47
"i didn't know that you are moderator"

Look at the right end of the blue bar in OtH's response box...see the star? If you put your mouse pointer on it, it says "Section Moderator".


Report •

#11
December 9, 2009 at 07:33:01
thanx jam but i can't move the mouse pointer bcause i'm using nokia 6230 loaded with opera mini 4.2 i have to disable images to load faster.

Report •

#12
December 9, 2009 at 07:58:14
kuwese

All mods have a star at the upper right instead of the circle.


Report •


Ask Question