Adjusting AGP Ram for Intel 82810E Board

Havas Joint operations: combined arms
May 16, 2010 at 09:11:16
Specs: Windows XP sp3, Intel CPU Celeron 1.3GHZ / 384 mb ram

Can anybody please help me out with adjusting AGP setting.
Through the BIOS, It came to my knowledge that the assigned AGP RAM onboard is 64MB by default.
Can I increase or decrease the same by any means ?

Please help me out.

See More: Adjusting AGP Ram for Intel 82810E Board

Report •

May 16, 2010 at 09:34:29
If you haven't been able to adjust the RAM upward it is most likely because you don't have enough RAM in your computer.

Generally speaking the amount of RAM that can be shared is related to the total amount of RAM installed in the system.

In your case I am surprised that the BIOS is sharing even 64mb. You indicate you have only 384mb installed. Look at the link below for a more in depth view of that chipset.

Report •

May 16, 2010 at 15:59:23
Are you talking about AGP Aperture size? Opinions vary. Here's one:

You're not really green until you're soylent green.

Report •

May 16, 2010 at 23:20:13
Yes, You are right. I am concerned with AGP memory size.

Can you please let me the procedure to adjust thesame with my avialble system memory of 384 MB Ram ?


Report •

Related Solutions

May 16, 2010 at 23:23:04
You need to read the manual for your system (motherboard) to learn how to change it. You don't have enough RAM to increase it. You should have a minimum of 512mb of RAM to run WinXP. 1GB is better.

Report •

May 17, 2010 at 10:01:10
"I am concerned with AGP memory size"

There's a big difference between AGP memory size & AGP Aperture size. Which are you asking about?

Report •

Ask Question