Solved Access Kodak Hero 7.1 printhead.

April 11, 2020 at 08:34:26
Specs: Windows 10
My Kodak Hero 7.1 printer needs a new printhead. I can't open the printer to access the printhead, is there a release switch? Every video or manual just shows it opening.

See More: Access Kodak Hero 7.1 printhead.

Reply ↓  Report •

#1
April 11, 2020 at 09:25:13
✔ Best Answer
See if these guides/videos are any help:

https://resources.kodak.com/support...

https://www.youtube.com/watch?v=Lx8...

This one is for a slightly different model, but a comment below from someone with your version found it helped him to remove the print head.

https://www.youtube.com/watch?v=PXN...

This one seems to generic re' Kodak but may be of help?

https://www.youtube.com/watch?v=n1A...

If you've never disassembled typical all in one unit... be very aware that they are true PIA. I partially stripped down a long serving Canon MP600r, which had finally generated a pretty well death knell error code; after about 10yrs or so of trouble free use. There came a point where it was clearly not really designed to be taken apart - unless you were fully factory trained. The internal connections were extremely fragile, tangled and easily disconnected - leaving you wondering where they belonged. I gave up - and I don't quite easily. The likely-hood of a successful repair was low to start with - and a chat with a Canon tech confirmed that likely the printer had reached the end of the road; and also they seldom actually fully serviced/repaired them. Invariably they were simply replaced (if under warranty) or else you got another unit returned to you - for a reasonable repair fee - not knowing that it was likely a new one, or one that had had only a minor repair event...


Reply ↓  Report •
Related Solutions


Ask Question