11 beeps, after fixed -no display

February 13, 2009 at 21:57:11
Specs: Windows XP
os:windows xp
cpu pentium 111

Hi, I have problem...

I had to change places of the pc in the house,so I disconnected the cable that comes to signals to monitor from pc, hope You know what I'm describing, I don't know what it's called.
and afterwards it gave beeps :-

compareringly 1 long one 7 short ones then after some seconds 2 short ones ane a another one := totally 11 beeps
plus there was no display

One of my friend said it's a RAM problem so as he said I disconnected and conneted back the RAM card.
now there's no beeps, pc starts but nothing is displayed.
when predescribed cable was disconnected no signal messege is displayed, but after it is connected back there's only black screen.

4 of the pins are missing of that cable could that be a problem but pc worked two days ago.

I hope You would help me,.Thank you.

See More: 11 beeps, after fixed -no display

Report •

February 14, 2009 at 07:30:07
If all you did was move the PC from one room to another, something probably got knocked loose inside the case. Without knowing the make/model of your motherboard or at least the type of BIOS it uses, it'll be tough to decypher the beep codes. Make sure the RAM & video card are both fully seated.

Here's the beep code charts for the 3 most popular BIOS types:

AMI BIOS Beep Codes



Report •
Related Solutions

Ask Question