Lost installation cd for Retail Plus Webcam RP-CAPU-835-BP

November 17, 2020 at 23:32:07
Specs: Windows 10
Hello All,

I lost the installation cd for Retail Plus Webcam RP-CAPU-835-BP.

Any source to download the drivers?

Manufacturer no longer provide support.

Thanks for your help,


See More: Lost installation cd for Retail Plus Webcam RP-CAPU-835-BP

November 18, 2020 at 00:40:10
Can’t vouch for this source, but it may be worth a try.


When you download the content, fully scan your computer afterwards, and include the download.

When you run/install the drivers carefully monitor the process and watch for any, all precise ked boxes, and uncheck any for anything other than the driver(s). You’ll be watching to prevent unwanted inclusions (junk, browser changes etc.) which frequently are bundled in many software downloads.

You might also download/install (first) unchecky which is a free utility to monitor installations and uncheck (as above) unwanted items. But also monitor the driver installation even with unchecky invoked.

Also make a restore point before installing the drivers - just in-case...

message edited by trvlr

Reply ↓  Report •

November 18, 2020 at 04:49:57
That webcam is really old. Did you try plugging it in to see if Win10 automatically installs drivers?

Reply ↓  Report •

November 18, 2020 at 05:30:00
Might well work as per riider's suggestion. I haven't found that I needed drivers for webcams I used in the pas, using XP and/Mac OS X.

Reply ↓  Report •

Related Solutions

November 19, 2020 at 00:12:23
I will give it a try.

Reply ↓  Report •

November 19, 2020 at 00:15:10
In the device manager it says: USB Video Device, with an exclamation mark.

Reply ↓  Report •

November 19, 2020 at 09:12:38
From what I could find, this webcam was designed for Win98 thru Vista, so even if you can find the drivers, they probably won't be Win10 compatible.

I found this in the product description on another site:

"RetailPlus Hi-Resolution Notebook Webcam (640 x 480). Small clip-on design to save space. 360 degree rotation design to avoid blind spot. The webcam requires no driver installations to run on windows XP or later. Simply plug in the camera and start video chatting! You don’t need to worry about downloading or bringing your drivers along!"

EDIT: I did some more digging & came up with the following. Try the 4th one down on the list. Click Free Download, then Download Now, prove you're Not a Robot, then the download will begin.

I downloaded it & had a look at the INF file. The camera appears to be based on the Vimicro 0303 chip so this link may also be of help: http://www.vimicro.com/english/prod...

Good luck!

message edited by riider

Reply ↓  Report •

November 19, 2020 at 19:28:30
I tried to install the drivers through Drivers Guide and I got a screen says: Windows encountered a problem installing the drivers for your device.
The device cannot start (code 10)

message edited by Mazi

Reply ↓  Report •

November 19, 2020 at 19:59:20
And after trying the drivers on vimicro.com, windows encountered an error while attempting to install.

And it says: The third-party INF does not contain digital signature information.

It could see the camera as: VIMICRO USB PC Camera (VC0303).

Any advice going around the digital signature?


message edited by Mazi

Reply ↓  Report •

November 19, 2020 at 20:48:25
Either invest in a new webcam or install a supported OS such as XP in a virtual machine so that you can use the webcam you have.

Reply ↓  Report •

Ask Question