Solved USB memory card access in DOS

Umc / V 1.7, 3.3, 3.4
November 2, 2012 at 11:40:10
Specs: XP proffesional, AM486/120MHz/32Mb
I want to know why in a machine running DOS and with a usbaspi.sys and di1000dd.sys properly set and working in a USB 1.1 card and with 3 pen drive used as normally, can't read the memory card inside a photo camera. Is also needed some other driver?

OS is the DOS 7.10, not the XP above said.

Many thanks in advance.

If there is a possibility of several things going wrong, the one that will cause the most damage will be the one to go wrong.


See More: USB memory card access in DOS

Report •

#1
November 2, 2012 at 14:41:57
✔ Best Answer
If you are trying to read the card while it's inside the camera, the camera must be switched on so that it's read/write head has power to make it work.

If that is not the problem, it could be the camera needs a driver supplied by the camera maker, but these are for Windows, not DOS. In that case you need to use a card-reader instead of trying to use the camera to access the card.


Report •

#2
November 5, 2012 at 04:13:27
OK, thank you Phill!

If there is a possibility of several things going wrong, the one that will cause the most damage will be the one to go wrong.


Report •
Related Solutions


Ask Question