My FSB:DRAM is 4:16… is it problem??? Data from CPU-Z is BUS speed Core=133 MHz and DRAM freq=532 MHz Channels=Dual, DC mode=Symmetric, CL-tRCD-tRP-tRAS-tRFC=7-7-7-20-86 Slot#1=PC3-10600 4GB CL9(max in 685 MHz)–Kingston Slot#3=PC3-10600 2GB CL9(max in 685 MHz)–Samsung I use intel core i5-460M ...

I have purchased a pentium 4 631 and wish to overclock it. I have used set fsb but i cannot get it past a certain point without crashing. I need a windows program that allows me to change the cpu ...

when i switch-on my system, i get a message”cpu over voltage error” “press f1 to resume”, after i press F1, it displays “checking nvram” ,and proceeds like normal system but its hanging up many times and when i am shut ...

Can anyone advise me what thickness of thermal pads I need for a Dell E6400? The original pads appear to be two different thickness (two different colours). The gap between the GPU and heatsink is too big for paste alone ...

I just recently purchased an AMD Athlon 64 X2 5600+ Windsor and placed it into my old “form-factor” pc-motherboard: an eMachines (WMCP61M – Socket AM2). It now runs a lot faster than the original single-core 2650e chip. And not to ...

I’d like to upgrade CPU on Gigabyte GA-945GCM-S2L motherboard to E8500, but it’s written on official website that it’s only supported by overclocking “(F6(by Overclocking)”. What’s that supposed to mean? I know in general what overclocking is, but I can’t ...

cpu upgrade : celeron900 800mhz socket p to intel p8700 2.53mhz socket p ? ,bios cannot upgrade now ,ordered new battery to upgrade bios to 1.30 to 1.50version as cpu p8700 would not run or start but old cpu a ...

Hey everyone, I am new to this overclocking i am wondering what’s the highest i can raise for my Intel Core 2 Duo E7300 or mid high( don’t want to burn it haha) and how do i overlock step by ...

Ok so I was wondering whether or not this computer stands a chance. I bought it about a year ago at Wal-Mart as a computer for the wife, but since she’s done with it I want to know if it’s ...

Hello, I recently upgraded into a new processor Intel core 2 quad Q8400(used one) and the system boots up and get stucked at verifying DIM pool data. I don’t know what the problem is. -I have updated the latest BIOS that ...