HELLO! software to overclock PLL no. 954128

March 9, 2011 at 03:23:05
Specs: Windows XP , intel pentium E2140/ RAM- 2GB
CPU- inteel pentium E2140
NAME- conroe
speed- 1.60Ghz

mobo-D945GCPE
chipset-i945G


See More: HELLO! software to overclock PLL no. 954128

Report •


#1
March 9, 2011 at 04:17:35
The board does not support any overclocking features................

http://www.digital-daily.com/mother...


Report •

#2
March 9, 2011 at 04:57:09
...To be more specific...
Your board does not support overclocking.
Overclocking is best done in the BIOS, yours does not have the options.
Software overclocking does not generally work well, but the ones that work at all (reasonably safely) are the ones that are supplied with some boards that DO support overclocking and they work only on those boards, due to built in support.
Sorry, you will need to keep it, replace the board (G43 or G45 chipset from Gigabyte, Asus, Biostar or a few others) but make sure it supports your CPU, or better, wait and replace the whole thing. In the mean time, you can upgrade your video card if you are using the stock or onboard video which will give you a significant boost, especially in gaming and graphic programs.

You have to be a little bit crazy to keep you from going insane.


Report •

#3
March 9, 2011 at 23:16:25
I believe he knows the board doen't support oc that's why he asked for soft.
U can use clockgen but i don't recommend.

We can not fight new wars with old weapons, let he who desires peace prepare for war - PROPHET.


Report •

Related Solutions

#4
March 12, 2011 at 23:57:33
hmm, but, could you please recommend me the best overclockable board i could use for the same processor?

Report •

#5
March 13, 2011 at 05:18:12
I would recommend :
http://www.newegg.com/Product/Produ...
if you can use a full ATX board (I'm running an E8200 @3.2GHz on one of their P43 boards, the P45 version would be very slightly better, but hard to find now, especially in the DDR2 version - your memory), but if you need a micro ATX board, then absolutely (I had an E2160 overclocked nicely @3.2GHz on this G41 board but now running an E7500 Core 2 Duo @3.54GHz):
http://www.newegg.com/Product/Produ...
Just make sure you run a separate graphics card since the onboard graphics will severely limit overclocking. For the future, these support Core2 series Duo and Quad, but remember this is relatively old technology though much better than you have. Your memory speed may limit your overclock so make sure you do not run them over their spec's or you will have problems. There will be a learning curve since overclocking every single CPU will be different.

You have to be a little bit crazy to keep you from going insane.


Report •

Ask Question