Bsod stop code memory management

January 21, 2020 at 22:32:49
Specs: Win 10, 2400g /crucial ballistix 2666
Hello!

Few days ago i formated all my drives and reinstalled win10. Everything seemed fine.

Then yesterday, i saw new bios version (5407) on asus site, and updated it. All my OC settings got reset, so i started playing with it. I think i used all the settings just how they were before. Again, everything was fine.

Then i wanted to check stability with aida64, and after a few munutes i got BSOD stop code memory management. After restarting, i ran aida64 and got error. After that i tried prime95, just to get error again, but only on my worker4. So i started it again and got the same BSOD again. I've been looking for solutions for hours, but nothing worked.

Things i tried:

-Memory diagnostic tool - no error;

-Disk check (all drives)- no error;

-Check for updates - no luck;

-Crystal disk info - showed 197 relocated sectors on my empty HDD

My gpu drivers are adrenalin 2020. I first updated latest chipset driver.

I'm running out of ideas!

My rig:

https://www.userbenchmark.com/UserR...

My OC settings: 3.9ghz cpu (1.4 vcore), gpu is on auto with gfx and soc on 1.1 (maybe i should increase soc a bit?), ram is on 3066mhz (1.39 dram).

Performance boost - off

Global C state - off

LLRC - medium

Any idea what if i perhaps did something wrong?


See More: Bsod stop code memory management


#1
January 21, 2020 at 23:56:40
"Few days ago i formated all my drives and reinstalled win10"
That is not a clean install.

During the install, Delete all the partitions, keep hitting Delete until Delete & Format are greyed out. You are then left with an Unallocated drive.
No other drives should be connected during the install.


Report •

#2
January 22, 2020 at 02:20:59
I did exactly that. Only my samsung evo 960 was connected during the installation.

Report •

#3
January 22, 2020 at 02:24:22
What happens when you uncable the samsung evo 960?

Report •

Related Solutions

#4
January 22, 2020 at 02:38:55
I will try that after work, and let you know. What are you suggesting?

Report •

#5
January 22, 2020 at 02:43:41
"What are you suggesting?
Anything can happen, until you try & I get an exact report, I don't know what to expect.


Report •

#6
January 22, 2020 at 02:45:21
try VCCSA (system agent) to 1.10v
and you didnt forget cpu LLC (load line callibration?)

i5-6600K[delid]@4.9GHz Core/4.6 Cache@1.488v | 2x8GB DDR4-3333MHzCL13@1.49v | Sapphire Nitro+ SE RX 590 8GB@1615Mhz core@1.13v/2236MHz


Report •

#7
January 22, 2020 at 02:47:24
"I will try that after work"
I shall be available for about 2 hrs, others may step in, if that doesn't work out.

Report •

#8
January 22, 2020 at 04:06:46
Johnw, I think we didn't understand each other. Only my nvme was connected during installation, meaning, my system is on nvme.
@hidde663 I did set LLC at medium. I'll see if i can find vccsa in bios and see it's values.

Report •

#9
January 22, 2020 at 05:31:47
default VCCSA is 1.05v, default VCCIO is 0.95

i5-6600K[delid]@4.9GHz Core/4.6 Cache@1.488v | 2x8GB DDR4-3333MHzCL13@1.49v | Sapphire Nitro+ SE RX 590 8GB@1615Mhz core@1.13v/2236MHz


Report •

#10
January 22, 2020 at 13:36:46
"my system is on nvme"
Got it Makgora.

Report •

#11
January 22, 2020 at 21:32:23
Hey people, i think i was just too aggressive with my cpu and ram OC. I incresased LLC to higher level, and it was better. Also, i had to increase soc to 1.19 and set soc LLC to higher level, and it seems fine.
But I'm not sure is it safe to have soc and vcore so high PLUS setting their LLC to more aggressive?

Report •

#12
January 23, 2020 at 01:27:39
I advise to not pass 1.2 VCCIO, 1.25 VCCSA, only needed if you would want to push the integrated graphics chip (Vega 11) to it's limit (~1650Mhz core clock), 1.45 VCORE under load and 1.5 VDIMM (memory).

If you have a super cheap motherboard, stay at 1.15 VCCIO and VCCSA.

And also use the hwbot.org x265 4k test for CPU stability, if it passes that, it will pass everything else.
link: http://hw-museum.cz/data/hwbot/HWBO...
You can use memtest + memtesthelper so check for memory stability.
Here are some instructions how to set it up properly:
https://github.com/integralfx/MemTe...

i5-6600K[delid]@4.8GHz Core/4.6 Cache@1.456v | 2x8GB DDR4-3200MHzCL12-12-12-28-1@1.5v | Sapphire Nitro+ SE RX 590 8GB@1610Mhz core@1.13v/2236MHz


Report •

#13
January 23, 2020 at 02:11:07
I couldn't find VCCIO and VCCSA anywhere in my bios. Maybe in my bios they have different name? My motherboard is Asus prime b350-plus, so yeah, it's a budget one.

Report •

#14
January 23, 2020 at 02:42:23
SOC/VCCIO/IO voltage, memory controller voltage, its all the same.

for some reason ASUS calls VCCIO on your particular motherboard "VDDCR SOC voltage", and VDIMM is called DRAM voltage...

ASUS, Asrock, Gigabyte, MSI, etc... don't always give it the same name.

I cannot find any footage about system agent about your particular ASUS board..

Perhaps get a digital version of your motherboard so you can search for key words quickly with ctrl+F.
But honestly don't bother with it, just save up some money and buy like a used RX 570 for like 120$

i5-6600K[delid]@4.8GHz Core/4.6 Cache@1.456v | 2x8GB DDR4-3200MHzCL12-12-12-28-1@1.5v | Sapphire Nitro+ SE RX 590 8GB@1610Mhz core@1.13v/2236MHz


Report •

#15
January 23, 2020 at 05:36:06
Thanks a bunch man! I'm getting rx 470 8gb saphire nitro from a friend for about 80e in a few weeks, after he buys 5700xt for himself. He's been using it for less than a 3 years without a problem.

Report •

#16
January 23, 2020 at 06:40:24
if you want to get a custom bios for the card, i can make one.
you can also flash a sapphire nitro rx 570 8GB on it.
custom bios has some issues with AMD's driver tho but, you can expect about 1340core/2000mem/ 225 power limit and tighter GDDR5 memory straps haha.

if your friend bought a higher end model RX 5700XT he can use igor's lab softpowerplay mod to get some real gains aswell, tho i do not recommend it on a blower card and some cheaper versions.

And yes i've been playing with those cards for a while now, mostly AMD/Ati Polaris tho (RX 570 and RX 590)

i5-6600K[delid]@4.8GHz Core/4.6 Cache@1.456v | 2x8GB DDR4-3200MHzCL12-12-12-28-1@1.5v | Sapphire Nitro+ SE RX 590 8GB@1610Mhz core@1.13v/2236MHz


Report •

#17
January 23, 2020 at 08:33:27
I will be on vacation tomorrow for a week btw, just so you know :)

i5-6600K[delid]@4.8GHz Core/4.6 Cache@1.456v | 2x8GB DDR4-3200MHzCL12-12-12-28-1@1.5v | Sapphire Nitro+ SE RX 590 8GB@1610Mhz core@1.13v/2236MHz


Report •

#18
January 23, 2020 at 08:39:59
I never used custom bios, but lately I'm in a mood for making the most out of my system, so yeah, i can try it out. :-)

He saw a video about upgrading rx 5700 to match its xt version, but he's too afraid to play with it, so he's getting the xt version and i doubt he'll dare to change anything haha. I think he got his eye on red devil one or nitro.


Report •

#19
January 24, 2020 at 03:06:56
will you look at this ... released 4 hours ago:
How to Flash your RX 5700 into a 5700 XT - FREE Performance! (with benchmarks vs 5600 XT / 5700 XT): https://www.youtube.com/watch?v=gYf...

i believe "gamers nexus" also made a very in depth, safe way to do it but for the RX 5600 XT (which got a new bios, due to EVGA's RTX 2060 KO which was released at a similar price point)

i5-6600K[delid]@4.8GHz Core/4.6 Cache@1.456v | 2x8GB DDR4-3200MHzCL12-12-12-28-1@1.5v | Sapphire Nitro+ SE RX 590 8GB@1610Mhz core@1.13v/2236MHz


Report •

#20
January 24, 2020 at 05:57:54
Yeah we saw something similar, but since he's afraid to do that, he's just going to to buy XT version... And sell his rx 470 to me.
Happy vacation!

Report •

Ask Question