cr-562-b driver

Original Message

Name: Rosco
Date: October 22, 2001 at 13:46:25 Pacific
Subject: cr-562-b driver

Comment:

Running 3.1 on old 486 for the kids and need cd rom driver ( i think? )
Can you help?
Rosco ( fumbling first time user )

Report Offensive Message For Removal

Response Number 1

Name: DR
Date: October 22, 2001 at 14:16:22 Pacific
Subject: cr-562-b driver

Reply: (edit)

Rosco,
Your CD-ROM drive should be attached to either a soundcard or a CD-ROM interface card. This is an older proprietary drive.
If you have the soundcard and the CD-ROM drive is attached internally to the it with a ribbon cable cable, make sure that the soundcard drivers are installed and the soundcard is working before installing the CD-ROM drivers.
If it is just attached to an interface card you will only need to install the CD-ROM drivers.
In either case, you will use the same CD-ROM drivers. These from the PANASONIC FTP site should work.
ftp://ftp.panasonic.com/pub/Panasonic/Drivers/OEM-CDROM/
download
56X_DOS.exe
Good Luck

Report Offensive Follow Up For Removal

Response Number 2

Name: ferri
Date: November 23, 2001 at 12:30:06 Pacific
Subject: cr-562-b driver

Reply: (edit)

thx
das
asd
asd

Report Offensive Follow Up For Removal

Response Number 3

Name: kevin
Date: January 14, 2002 at 00:10:57 Pacific
Subject: cr-562-b driver

Reply: (edit)

4 months later and you have another person looking for the exact same f---ing driver.
thank you so much.

Report Offensive Follow Up For Removal

Response Number 4

Name: jake
Date: February 23, 2002 at 06:41:09 Pacific
Subject: cr-562-b driver

Reply: (edit)

One more with problems. How ide cable connect???

Report Offensive Follow Up For Removal


Need CR-562-B CD-ROM driver cd-rom driver pansonic cr-593-b (40 Need drivers for Matshita CR-563-B cdrom2x model CR-563-B Reveal cdrom cr-563-b	cr-563-b mscd000 needed cd-rom2x model CR-563-B cr-563-b jumper settings Missing CD Rom Driver CD instalation on 486