Summary: I get Error 8, "Not enough memory", on the very last command (net start). I've tried some little things but basically have VERY little workiing knowle...
Summary: I am facing a peculiar problem .. I have a Win98 SE CD kept in CD-ROM drive on my WinNT server. I want to install Win98SE on my client machi...
Summary: If you are using himem.sys and emm386.exe correctly in the config.sys file, confirm you are using LH (short for LoadHigh) in the "autoexec.bat" with t...
Summary: Here you go, an example of my own: config.sys [Menudefault]=Windows,10 [Menu] menuitem=Dos menuitem=Windows menuitem=Clean [Dos] DEVICE=C:\DOS\SETVER....
Summary: Here's the answer. Obtain your NT server CD. Download the latest NDIS2 driver for DOS that complies with your Card. Browse from a dos-prompt to the d...
Summary: This is the autoexec.bat of the bootdisk that I've made: @ECHO OFF PROMPT $P$G path=a:\net smartdrv /x a:\net\net initialize a:\net\netbind.com a:\net...
Summary: Here is the AUTOEXEC.BAT file from a boot floppy which we use to connect to our network. This is for a 3COM network card. Names may vary for other car...
Summary: Hi, I am needing some help in cleaning up my conventional memory. At start up I only have 367,920 KB of conventional memory left!! I cant even open so...
Summary: The command to use is net use indeed for example net use e: \\computername\sharename But you need to get connected to a network. You can get a network...
Summary: hello first, i would like to know... what kind of op.sys. is dos? is it a 32bit or a 16bit operating system? my problem: i got a 32bit citrix-client....
Summary: I'm in a real jam here. I used Norton Ghost to make a ghost image of my work-laptop's hard drive. I wrote the image to another PC on my network, using...
Summary: I have set up MS Client 3 on my portable. I got my pcmcia NIC drivers installed, as well as the tcp/ip protocol. the programs and devices started are...
Summary: Thanks for the replies. Here are my Autoexec.bat and Config.sys entries. If anyone can tweak them, thanks. AUTOEXEC.BAT LH /L:0;2,1728;1,28224 /S C:...
Summary: I run a new install for my servers from a floppy that boots to the network and uses the unattend.txt to load my OS. When trying to do this with a DELL...
Summary: I am trying to setup my machine to access a network share from DOS so that I can perform a Ghost of my hard drive. I am using MSDos 6.22 and my TCP/IP...
