Summary: I got the disk C: formatted and set active with fdisk off of a WIN98 Floppy Bootdisk, I have made a disk with the following files: Autoexec.bat / Comm...
Summary: I posted this on another thread as a followup but I am posting it again new so that it attracts attention. I got the disk C: formatted and set active ...
Summary: hi again,i still cant get win3.1 installed on this old compaq 286 laptop.i did get d.o.s 6.0 installed.now when i try to install win 3.1 i get a messa...
Summary: Make sure you are not running Windows in standard mode. Make sure himem.exe is mentioned in your config.sys. Check your virtual memory in your Windoo...
Summary: I'm sure it should work for someone. For me it conflicts with fdxms.sys, and hangs if I load himem.exe instead, but there must be some way to make it ...
Summary: I have a 486DX machine running on DOS6.22. For some strange reason it is not willing to create usable UMB's during the startup procedure. The first 3 ...
Summary: This is not a question, but an answer to the many many questions about this I get. Most USB boot problems come from two things: 1) Files were for Flop...
Summary: I suggest a boot disk that loads the HD's drivers. If you have a USB storage thing on your keys/pen you can just use that; here's how. This is from an...
Summary: Himem.sys provided by microsoft hangs on a Compaq Proliant 8500 server. The solution is to use the himem.exe provided by Compaq. Then smartdrive will ...
Summary: The most recent version of DOS is MS-DOS 6.22 unless you're talking about some oddball brand of DOS. You can download the files you need from http://...
