Summary: Hi! I have some cartoons that are actually exe files, whose properties says, 'Macromedia Flash Player 6.0' What is this called? (I noticed someone in...
Summary: Can I burn my flash.exe and bios#.bin file to a CDR, and boot into DOS with boot cd, and run the flash using the data off the CDR? I've done it lots o...
Summary: Hello! there is a problem please help me |: .. why Hotmail show virus in my FLASH exe attachement when i try to send it. as i know that there is n...
Summary: This is beginning to drive me crazy... I want to flash the BIOS on my Asus 9800XT video card (NTSC version, since ASUS provides a PAL version too) and...
Summary: My approach in this has been to download an msdos boot floppy from www.bootdisk.com and set my xp pc bios to boot from the floppy first. I note the na...
Summary: ok your not reading the intructions at all. You can't access the C: drive from a boot disk, and you shouldnt need to. Maybe if you provide the make ...
Summary: First you determine what bios version you have. It may say this during boot up or you can see it inside the bios setup. Then you go to the web site o...
Summary: I installed Flash 4 and when I ran it it said FLASH caused an invalid page fault in module FLASH.EXE at 015f:00412a2f. Registers: EAX=00000000 CS=015...
Summary: The "flash command" /x worked for me. I experienced this first with a Gateway and next with a HP. It worked with both, however, in the case of the ...
Summary: Found S7AX27.bin in the net, can't get it to flash my BIOS (AWARD-BIOS). Board: Aladdin 2A5KKTP9C-00. COMMATE. After starting the flash...exe, it chec...
Summary: A bad battery will not let you detect floppy, it will still boot up. It should be bios corrupted, either from bad bios flash or bios chip going bad. Y...
Summary: egkenny, yes i did the command like that for both bios johnr, yes i extracted the .bin files to my floppy and am using the flash exe Sabertooth, i was...
Summary: Hi again people. I've started to flash my BIOS and the problem I'm now having is that the aflash.exe program I'm using says that the flash memory is u...
