Summary: OK...Afreey dvd-rom is not recognized as such. Right clicking my computer/prop/dev. manager/cd device+/highlighting dvd/ reads as dvdrom 1.01...proper...
Summary: Hello My previous post “three DVD IDE one HDD IDE?” explains a little background of my situation but is not necessary to read. I have found cable...
Summary: Hello. So I have three DVD drives and two HDD on my system. One is HDD is connected with an IDE and the other is SATA. So I was wondering if it wou...
Summary: System:AXG-600, Athlon, Invidia Riva tnt m64, 20g HD, OSwin98se, Hitachi DVD-rom GD-5000. I would like to get my DVD player working properly. Software...
Summary: SYSTEM:Celleron 400MHz,128MB,Diamond V550/16MB,Motherboard Elite b6bat-a+,DVD Asus E612/G.I use for movies the ASUSU DVD 2000 software. PROBLEM:When I...
Summary: Hi, I have the KA7 Motherboard with WD400 40 gigabyte harddrive ATA100@7200 Rpm, a DVD-Rom From Pioneer 16X tray loading. I have recently put this com...
Summary: I am going to be purchasing a used iBook Clamshell. I found a cheap IDE to USB converter at http://www.colorcase.com/idtousbcon.html but have a questi...
Summary: Hello, Here is a scan and save log from highjack this. Logfile of HijackThis v1.99.1 Scan saved at 11:44:42 PM, on 8/3/2006 Platform: Windows XP SP2 ...
Summary: Mr Secret's advice is good. Particularly about trying another known good ide cable. Make sure you have tested both its sockets. Also double check it ...
Summary: Help: I've recently had a clean install of my dual boot system. I have 3 HDs; 1 on IDE 1 which is the boot drive(s), and 2 on the ATA133 ports (set to...
Summary: I've been having touble with my CDRW drive not completing burns (fail of just freeze at about 88%). After some searching for answers I decided to take...
Summary: I tried to update my DVS DVD-ROM DSR-520H firmware and it did not work Had to unplug IDE cable,power to DVD-ROM restart computer, shut down plug the I...
Summary: I have the virus ADW RULEDOR.C and I cant get ride of it. I tried what was told to catina but I dont have the same files, can someone help. thanks Lo...
