Summary: Interesting disk, have to check it out. Here's a bit: [MAX] device=emm386.exe /v h=128 noems notr [COMMON] DEVICEHIGH=VIDE-CDD.SYS /D:MADX To get ba...
Summary: You are using DOS or Windows gives you these error messages? What you need to do is put Device=Himem.sys and Device=Emm386.Exe lines near th...
Summary: In your winnt\system32 folder, there are the files autoexec.nt and config.nt which work EXACTLY the same as their dos counterparts config.sys and auto...
Summary: I seem to have found the problem... After reading the "Troubleshooting emm386" article on Microsoft Knowledge Base one of the main reasons of emm386 ...
Summary: Hi, i am trying to flash the bios on a i430fx motherboard and it comes up with this message when i run the file which is meant to flash it... "Release...
Summary: I am keep receiving an error messages after I run the setup for windows95, because i format my hard disk and now I am trying to setup windows95 but I ...
Summary: I have the following line in my config.sys file: DEVICE=C:\WINDOWS\EMM386.EXE NOEMS Yesterday for the first time a DOS (QBasic) program refused to run...
Summary: You have to load himem in your config.sys - Click Start, Run and enter sysedit Make sure the following lines are present: DEVICE=C:\WINDOWS\HIMEM.SYS ...
Summary: Hi, I'm trying to run the old DOS game Frontier II on my new Amd machine. The computer uses Win2k Professional, and at first I had some problems getti...
Summary: HELP I had a complete power failure when the computer was running. When it was rebooted the following message was displayed on the scan drive. There ...
Summary: what is emm386 and what is it used for? i have this on my config.sys: DEVICE=C:\WINDOWS\HIMEM.SYS /TESTMEM:OFF DEVICE=C:\WINDOWS\EMM386.EXE NOEMS DEVI...
Summary: When "Starting DOS" comes on the screen press F5 or F8 and find out where the problem is in the config.sys. F5 skipps the config.sys and autoexe...
Summary: I made a bootdisk for wME. But i want to use it for playing old dos games, so i tryed to load emm386.exe for my Sblive's Sb16 emulation, but when i ad...
Summary: From the c:\> prompt, try dir/s emm386.exe. If you get file not found, you'll need to get a copy onto the hard drive. If the file is found (should b...
