Configuring a Gateway under DOS v 6

Original Message

Name: rhani00
Date: March 24, 2008 at 05:27:55 Pacific
Subject: Configuring a Gateway under DOS v 6
OS: DOS v 6
CPU/Ram: 64 Mb

Comment:

Hi,
Please, do the DOS OS (Version 6) support the "subnet" configuration.
For example: configuring a gateway 10.12.16.1 with a netmask 255.255.255.128
Best regards
Hi, everybody

Report Offensive Message For Removal

Response Number 1

Name: Bakers
Date: March 24, 2008 at 05:53:25 Pacific
Subject: Configuring a Gateway under DOS v 6

Reply: (edit)

If you mean MS-DOS 6.xx then by default it does not come with any networking software.
Therefore what networking software have you installed ??

Report Offensive Follow Up For Removal

Response Number 2

Name: Curt R
Date: March 24, 2008 at 07:37:55 Pacific
Subject: Configuring a Gateway under DOS v 6

Reply: (edit)

Here's a web site with good information and links to download networking software for DOS:
http://www.jacco2.dds.nl/samba/dos.html

Report Offensive Follow Up For Removal

Response Number 3

Name: Curt R
Date: March 24, 2008 at 07:38:53 Pacific
Subject: Configuring a Gateway under DOS v 6

Reply: (edit)

I forgot to add, you'll want to go to the section titled:
The Microsoft Network Client for DOS

Report Offensive Follow Up For Removal

Response Number 4

Name: rhani00
Date: March 24, 2008 at 16:08:15 Pacific
Subject: Configuring a Gateway under DOS v 6

Reply: (edit)

Thanks for the answers, just i want to know if the version of MS-DOS apply some restrictions when i configure network (especially the "netmask": to introduce subnet id bits)independently of the implementation of the IP stack.
Best regards
Hi, everybody

Report Offensive Follow Up For Removal

Response Number 5

Name: Bakers
Date: March 25, 2008 at 00:24:29 Pacific
Subject: Configuring a Gateway under DOS v 6

Reply: (edit)

MS-DOS 6 does not have any Networking Software built in, therefore any restrictions are in the software you are using to create a network.
Therefore what Networking Software are you taliking about, or are we supposed to guess ?

Report Offensive Follow Up For Removal


Best ghost speed under dos tcp/ip? printing under DOS help configuring a Raid 5 disk setup Making a network PC do stuff 3 Nets, 2 Nics, and a gateway	networking with win2k server no security in wlan read why ATA 186 and Cisco 1760-V Questions Help with a network design -v basic NETWORK SERVER help for a Dummy

Response Number 6

Name: rhani00
Date: March 25, 2008 at 04:25:01 Pacific
Subject: Configuring a Gateway under DOS v 6

Reply: (edit)

Ok, finally i understood your indication. I use PATHWORKS TCP/IP Version 5.0.
Best regards
Hi, everybody

Report Offensive Follow Up For Removal

Response Number 7

Name: Bakers
Date: March 25, 2008 at 05:21:56 Pacific
Subject: Configuring a Gateway under DOS v 6

Reply: (edit)

Surely that would be in the DEC Pathworks Documentation and nothing whatsoever to do with MS-DOS !!

Report Offensive Follow Up For Removal

Response Number 8

Name: rhani00
Date: March 25, 2008 at 08:00:36 Pacific
Subject: Configuring a Gateway under DOS v 6

Reply: (edit)

Hi,
After the network's configuration below, i couldnt ping the gateway. Are you any comment?
Host (OS: MS-DOS ver6; PathWorks ver5)====branché====> un switch 3560 (port f0/0 <=> gateway)
rem********Network parameters***********
%PATHRESEAU%\TCPIP.EXE /ip:172.17.50.10 /mask:255.255.255.0 /gw:172.17.50.1
rem***********END***********************
Best regards
Hi, everybody

Report Offensive Follow Up For Removal

Response Number 9

Name: Curt R
Date: March 26, 2008 at 05:42:50 Pacific
Subject: Configuring a Gateway under DOS v 6

Reply: (edit)

What device has the IP 172.17.50.1?

Report Offensive Follow Up For Removal

Response Number 10

Name: rhani00
Date: March 26, 2008 at 09:53:56 Pacific
Subject: Configuring a Gateway under DOS v 6

Reply: (edit)

Hi,
172.17.50.1 it's the ip adresse of a logic interface vlan10.
My host is attached to a fast ethernet interface f0/0 of a cisco switch, this port is affected to the logical interface vlan10.
Best regards
Hi, everybody

Report Offensive Follow Up For Removal

Response Number 11

Name: rhani00
Date: March 27, 2008 at 16:04:12 Pacific
Subject: Configuring a Gateway under DOS v 6

Reply: (edit)

Hi,
-------- f0/0--------------- f0/1 --------
| Host |=======|Cisco Switch |=======|Server|
-------- --------------- --------
Host: 10.11.12.13/25
f0/0: 10.11.12.1/25 (Default Gateway)
Server: 10.11.12.200/25
f0/1: 10.11.12.129 (Default gateway of the server)
The host's configuration is mentioned below:
%PATHRESEAU%\TCPIP.EXE /ip:10.11.12.13 /mask:255.255.255.128 /gw:10.11.12.1
The TCP/IP is executed successfully without an error message, but "netstat" command didn't show the gateway parameter, as it wasn't defined.
I hope that now the problems is clear for you, and i wait for any idea to advance.
Best regards
Hi, everybody

Report Offensive Follow Up For Removal