Summary: hi, the problem with the missing vsmonapi.dll and vsnetutils.dll-files during the installation of zone alarm is well known already. nevertheless, it s...
Summary: i had the free zone alarm installed but it was stopping system restore from creating its own restore points it also would not restore to restore point...
Summary: The File requires to run on the Zone Alarm installations. Requires: AV Scanner IE 4.0 or higher version then you can install the ZA. I had that happen...
Summary: i have sygate as my firewall and zone alarm pro but when i am on the internet i have only got sygate running and not zone alarm pro. So when i am Brow...
Summary: Installed cable modem yesterday >> worked great through out night & into this AM >> installed Zone Alarm >> now the modem won't connect for *any* prog...
Summary: I tried to install an old version of Zone Alarm, specifically 5.5. I couldn't do it even after compeletly and totally removing ZA 6.1. It just hung ...
Summary: I have a similar problem. When I shut down XP Home Ed., ZAP hangs until I check end program. So I now right click on the ZA icon in the task bar and...
Summary: Several people have posted lately that System Restore was not creating system check point automatically. One cause may be if you have Zone Alarm ver. ...
Summary: I had the same problem when i installed zone alarm pro 3 " I let it connect the first time to register the software and configure itself with my inte...
Summary: Suzi, can't help you but I'm having the same problems, did you down load the new MSN Internet Access5.4, that seems to be when I started having proble...
Summary: Zone Alarm doesn't use much resources. I have 64MB and run it all the time, while listening to internet radio with Winamp, web surfing, doing Word do...
Summary: Some of you may recall I have posted here in the past regarding problems with my connection. I was very close to posting again. Having un-installed Zo...
Summary: Hi All, I have no problems getting Zone alarms to work with Winmx and I use the settings that wawadave81 suggests above. the only problem I have is th...
Summary: I posted earlier under "System Restore not creating checkpoints." I've done some more searching and found that a number of participants to this forum ...
Summary: I have a problem accessing internet through dial-up connection in Windows Me. I can connect normaly but there is no "traffic"(no sent or recieved info...
Summary: hey people, I have zone alarm firewall. And when i open it up i have 11237 intrustions with 112 being high rated blocked since install which was about...
Summary: I have noticed that if my husband goes to certain web sites (porn).... Well, after going to these sites, sometimes my home page has been changed or t...
Summary: Sue - I have Zone Alarm running all the time and Callwave all the time. I did have to set the internet security to medium for it to work. I wish I d...
Summary: I seem to be having problems getting my email, thru Zone Alarm, I keep getting errors unless in Zone Alarm I uncheck email protectionI am posting to Z...
Summary: Hi Ranjan, Looking at the setting on my old computer, in the network sector, the host information should be PPP ADAPTER my setting for my machine is S...
Summary: Sue, I tested Call Wave while I had theZone Alarm set to high security, (called my home phone with my cell phone) and got a busy signal. I have call ...
Summary: dan, you will notice a significant decrease in those numbers after a while. zone alarm just solved a big spam email problem for me...i was receiving ...
Summary: hello you will have to let some of your programs act as servers with zone alarm or it wont let them on the internet. you can allso catch all spy ware ...
Summary: There new Zone Alarm Pro update has fixed all the problems, I mean it works great, no slow startup lag time. Even better is the new product from Zone ...
Summary: Zone Alarm is one of the best personal firewalls on the market. I have used it for a long time without a problem. I decided to upgrade to the Pro vers...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
