Summary: does the zenith z-note 425lnc support cpu upgrades. I pulled a 50mhz 486 from a zenith z-starex, and want to the replace the 25mhz 486 thats already i...
Summary: hi everyone, i've recently aquire a zenith z-sport 325s notebook; with a meger 2 megs of onboard RAM. i'm looking for the memory board that plugs onto...
Summary: hellp i have a ZENITH Z-180 LAPTOP and i have had to format it and then do a f-disk because of "PROGMAN.EXE" at start up whould not load after a long ...
Summary: Ok, My friend has this ancient Zenith z-ls/20 She wanted to upgrade from w3.11 to w95. So I gave her the complete w95 install on floppies. I dont know...
Summary: Richie, The main concern about CPU upgrades is voltage. Before you try any swaps--always verify voltage requirements for the CPU and make sure your M...
Summary: Z-Note flex what - there are lots of these - what model number? What processor? Etc. Etc. If the model number can be pinned down, a manual may tell yo...
Summary: I have a old Zenith Data Systems Z-Note 325L laptop 386 @ 25 Mhz / 4megs of Ram / 80 meg hard drive / tranceiver to Cat5 (10 base T) For more room, ...
Summary: I've recently obtained a Zenith Z-Player audio system, but I can't seem to locate Windows 3.1 drivers for it. And before you ask, yes, I do know that ...
Summary: Hy guys I have just bought a z-station 510 from ebay and was looking for support for it such as files,drivers,specs and so on and well it seems ZDS n...
Summary: I believe that your 386 is the perfect machine to learn how to install a lot of the stuff you are talking about. You should be able to find most of th...
Summary: I have a Zenith z-star 496 laptop with 2mb ram, that runs 3.1 in enhanced mode quite happily. what i need is more ram and a larger hard drive. Any ide...
Summary: I have a Gateway2000 4dx-33 and I just put in a 486dx2@66mhz cpu instead of the factory 486sx@33mhz. I was wondering if anyone has the settings for th...
Summary: Hi, I have an old laptop that I have been trying to get online with. I have a winsoc and I can connect, but I have been having problems trying to loc...
Summary: If it were me and I was going to go to the expense of upgrading the "old" pc, I would just gather the needed parts and start building. And on that not...
Summary: You are SUCH A FREAKING IDIOT if you believe the program does something! The program's a JOKE. Use EDIT to view the main EXE and you'll see a little n...
Summary: Well, it is possible to *install* Windows 2000 if you have Windows 3.1. I'm not sure if the Windows 2000 Upgrade from Microsoft will let you do this...
Summary: Hi David W.L.: You could use anything above a 386, but finding older hardward designed for 3.1 will be one if the drawbacks. I would not use anything ...
Summary: I want to upgrade to win98 but need a math coprocessor and have the following problem. I have an old NEC ProSpeed486SX/C laptop computer and a...
Summary: Hi Davide: You need to find the dip jumper for setting 2X on the Pentium 133 (guessing > 66mhz X 2, if you can set it to 1x you will run at 66mhz. Why...
Summary: Hi mk: Here's my opinions. 1) It seems, I'll have problem loading win 95 + basic office + browsers due to mamory & HD space? should i try to upgrade m...
Summary: Hi Pankaj M . Dhole: The HP 3200c was not designed for Win 3.1 from what it says on their web site, looks like you need Win 95 & later OS to work. You...
Summary: I am repairing a Zenith Data systems model Z-433D+ 486 computer that has a bad 3.5 inch floppy mounted Piggy back on a 5.25 inch floppy drive. I trie...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
