Summary: Only? That's still quite an overclock for a palomino. If you only have PC2100 RAM this could be what's stopping you acheiving more. As for the multipl...
Summary: i was over clocking my computer and restarted it and the computer comes on all fans work all light but no beeps or computer dont come up on screen no...
Summary: this is a home built pc it is not a dell dimension 2400. it just shows that up top cant get rid of it.. hello all. my friend is having problems with h...
Summary: i went into by bios to over clock my computer a little and i did that so then i got it up to a 2.8. once i shut down and restarted all i got was a bla...
Summary: Had a thread going that fell a ways down the list. I need to set my FSB to 266 so that my XP2100+ clocks properly & I know how to do it, so no proble...
Summary: Hi I have a Athlon 2400+ and when i run Amd's cpuinfo it gives its clock speed @ 1341 and Amd's cpuid gives it @ 1327. Sometimes it goes up to 1500+ ...
Summary: I was gonna have a look at your manual, but it's a rather big download & I didn't feel like waiting. Your board only "officially" supports 166mhz/333F...
Summary: With 124MHz FSB it's definately a PCI clock problem because between 100 and up to just below 133MHz the PCI clock is normally calculated by dividing t...
Summary: I am having problems with chaging the FSB to 133. I bought a xp2100 and on boot I see xp1500+. I changed the jumpers on the MOBO to 133 when the defau...
Summary: I've perused the forum and seen many issues similar to mine, but regretably no solutions that have worked. Problem: My Athlon XP2100+ is detected as a...
Summary: I have a problem with my machine: Motherboard Foxconn 400M01-G-6L Processor Athlon 3200+ XP (Code name: Applebred) The issue is that it's supossed th...
Summary: Raynkk, The similarities of our problems are amazing. I just bought a Soyo KT33 Ultra Platinum edition motherboard and AMD Athlon XP2100 package deal...
Summary: The 2100+ is supposed to run at 1733mhz (13 x 133mhz). Your PC2700 (DDR333) RAM may hold you back from hitting 200mhz (400FSB), but if the multiplier ...
Summary: You're at 143Mhz now? You'll need to get to 148Mhz to make ~2000Mhz and that'll put your pci freq at 37Mhz. If you can even get it there, that numbe...
Summary: Get rid of powerstrip and use coolbits. You can download it or do the hack yourself in the registry. Then the clock frequencies will be in the propert...
Summary: Depending on your motherboard and the type of cooling you have for your system, you could try the following by adjusting the Front Side Bus (FSB) cloc...
Summary: I am having problems getting my 1 celeron 400 to run at 400 MHz in my abit bp6. In the BIOS, i have the cpu soft menu set as: cpu speed: user defined...
Summary: Ok.. im gona say this but someone might pipe up about me being wrong....lol Anyway... I heard that OCZ memory was being investigated for overclocking ...
Summary: How much of a difference would a CoolerMaster "Silent" (DP5-6I31C-OL) fan rated to cool an XP2100 at 3500RPM but only reported by the system as spinni...
Summary: i have recently unplug some wires on the motherboard causing my processor speed to slow down from 1800 MHz to 1150 Mhz ! The problem is how do i set b...
Summary: I have the same CPU and same friggin problem! I think it's either something wrong with the CPU or maybe just the thermal diode is messed up in it and...
Summary: I am running into a strange problem overclocking my 700Mhz Athlon T-bird. I have an ASUS A7V rev 1.02 (with all the nice DIP switches).... anyway, I h...
Summary: Since you started having this problem only after you installed a extra hard drive you probably have a bad power supply or under rated supply to say t...
Summary: Ok, I ran the performance wizard in Sisoftware Sandra, and it gave me these problems: "Warning W2541 - FSB exceeds chipset rated FSB. If you’re over c...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
