Summary: i have a k7s5a pro mobo and 1.3 duron and 512 ram, i overclocked my computer too much, wouldnt start so i put a dif cpu in and then it worked, i but t...
Summary: Who wants to be my saviour? Im looking for suggestions as to why my Sony Vaio wont start up past the '1' bar on the bottom of the screen. Power is go...
Summary: That can't be the problem. I am no simpleton here. I left the old hard drive on master and put the new one in on slave, so that I could start up the c...
Summary: Thanks for your response. When i first purchased my computer the start up time was much faster. It would start up in half the time. I did run a disc c...
Summary: ya, you can't just set the fsb from 100 to 133 just like that on duron cause the duron has a loked multiplier ==> by setting the fsb to 133 you clocke...
Summary: I was overclocking my AMD Sempron 2300 and I think I overclocke it to much. Computer wont start now. Nothing shows up on the moniter and and the cd li...
Summary: I switched a few settings in BIOS and now the computer wont start up. I overclocked it, and played with a few of the AGP settings. And now the compu...
Summary: After some experimenting with overclocking by changing the jumpers only, windows xp wont startup normally. But when i start it up in safemode, no prob...
Summary: I got a new mother board for my computer. It is a Socket 370 ASUS MEW-AM. My processor is an Intel Celeron 500Mhz processor. It's bus speed is 66Mhz, ...
Summary: "sooooo what you are saying Jam, is that one should synchronise RAM and CPU bus speeds to the same figure" Exactly. "i didn't increase the VCore volta...
Summary: I got my XP 1800+ up to 148FSB but I had to up my voltage to 2.000v to get it there stable. Is there a point to when I can have too much voltage? Or s...
Summary: I build a computer from scratch for my nephew and it wont start. System: ASUS TUA266 ALI ALLADIN PRO 5T DDR Celleron 800 MHZ 192 MB RAM DVD-ROM AGP CA...
Summary: i have an aopen ak75 mobo [sis 745 chipset]and am having trouble reading temps. i have an amd xp1600[1.4ghz] running at 1.71ghz. in the bios, i have t...
Summary: okay if i got this right "Changed POWER BUTTON CONNECTOR orientation - still does not start." and "fdd power connectors Yellow wire has come off...?"...
Summary: The way to overclock any geforce card is to download a program of the internet called nv max i dont mess with the coolbits because its never worked f...
Summary: I was messing around with some overclocking, and when I saved and exited the bios, my computer wouldn't post. Would that probably mean that my proces...
Summary: ok so i finally got my motherboard, and guess what everything works, YAAAY, so now i installed windows XP, and set up everything. I now decided time ...
Summary: ive just got an amd 64 3000+ processor with an abit av8 motherboard, and i need some advice on how to overclock it. ive tried using UGuru but it will ...
Summary: - Lower the CPU Freq to 250MHz (I believe this is what you're calling HHT). At 269MHz your RAM would be running at 224MHz & my guess is that's too muc...
Summary: Hi, i Have been recently experiencing a problem when my computer starts up. When it starts up the computer freezes and i have to switch it off to star...
Summary: I DONT KNOW VERY MUCH ABOUT COMPUTERS, but i figure id ask for your guys help. My grand mother gave me my computer back and said it worked fine... i t...
Summary: If you are overclocking too much you may have problems with games locking up, you may start seeing artifacts, and/or you might smell something funny ;...
Summary: I am posting this guide for basic overclocking and warnings. No offese or anything but I am getting very tired of answering the same questions everyd...
Summary: First time OCClocker, went well, read up first "jam" so I could understand. I have got my 800 duron running at 895 and faster speed is noticable. I wa...
Summary: You won't burn out anything if you overclock too much...your system will either become unstable, or it won't boot at all. Then you just use the ClearC...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
