Summary: just a little clarification...in my two hard disk setup, if i fdisk c: first with a fat 16 of 125mb or so, then fdisk a fat32 partition and install wi...
Summary: WinNT 4.0 (sp6) running 1-Ghz. Compaq workstation wants to hang 5 or 10 seconds when launching the GUI at start-up. Is it just the overhead from appl...
Summary: I have a problem here where my pc will begin booting up NT with no problems, but when it gets to the blue screen, the monitor goes into something like...
Summary: I want to install winnt 4.0 on compaq proliant 3000 server having 3 x 4 GB SCSI hard disks with raid 5 controller card. How to install NT 4.0 on it. I...
Summary: Hi there, Every time I boot up my pc now It autochecks, yet there doesn't seem to be any faulty files or directorys to blame. I've also recently done ...
Summary: after install NT 4 worksation on boot up I have got password(administrator) error.I am aware of caps lock etc. is there any way we can any boot win bo...
Summary: Have a 10GB Win98 FAT32 harddrive (Drive-A). Planning to add a 27GB harddrive (Drive-B) to install WinNT 4.0 Server there: - Use Win98 to format a 2G...
Summary: Hi, I'm installing Windows NT 4.0 on a machine that has an IBM 20.5G bytes IDE hdd. Since the Hdd is greater than 8 Gbytes I downloaded the Atapi.sys ...
Summary: Hi Folks, My WIN NT Server also doesn't boot to the Admin log on. It is freezing at the blue screen. My server is Micron NF6200 and all HDDs are SCSI ...
Summary: hi i have install winnt on c: c: is only pertion on my hard drive now i want to make other partitons like e: d: f: how can i make partition on winnt...
Summary: I HAD winnt 4.0 workstation in c: (2048 mb)and created an extended partition d:(4001 mb)where after some problems in the installation (the second step...
Summary: I loaded Win98 on a system that was preloaded with WINNT 4.0. I am now unable to run WINNT - it just boots directly to WIN 98. Of course I didn't crea...
Summary: Hi,everyone: I have installed an os of windows98 on a primary partition, and another windows 98 on 2nd primary partition for work and research. An...
Summary: Hello all, I had a normal AGP card installed on my computer with multiple boot: Win 98 SE, Win NT 4.0 & Red Hat Linux 6.1. Everything worked just fin...
Summary: I have NT 4 running on several HP Vectra (PIII, 64 MB RAM, SP6). They will not boot past the NT boot screen. I have tried the HP restore CD (it runs...
Summary: Server is running WinNT 4.0. When I map a drive from a WinNT workstation, it connects. When I reboot and it comes back in, then it says it can't conne...
Summary: hi, i have a dell 420 workstation using NT 4 servace pac 5 duel 16 gig scsi harddrives no raid os is on a fat32 and there are 2 nore ntsf prtitions. 3...
Summary: I have Win98 with fat32. Is it possible to install WinNT 4.0 on a NTFS partition? I have partition magic 4.0. If this is not possible is there a wa...
Summary: We are trying to run Win Nte on a 166 MMX intel Pentium Processor. The system used to boot up earlier. Now we observe while booting up the message 'OS...
Summary: I have a server currently running WinNT 4 Enterprise Edition (SP6a) and is also a BDC. My question is if I can UPGRADE to Win2K advanced server as a m...
Summary: I am daul booting between winnt sever 4.0 and win98. everything is working o.k. but when i try and open users manager for domains I get an error messa...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
