Summary: I have WinNT 4.0 installed on the second partition of my computer. I have partitioned my disk with the WinNT-setup (That seems to be a problem for Win...
Summary: Hi! I have Win98/NT4.0 Dual boot on PC. I would like to install Win98 SE on my PC without formating current win98 nor NT4.0. Any suggestion....
Summary: John, the only way that I have found to enter Safe Mode in Win98 with a dual-boot system is to go to msconfig>advanced and put a check next to "enable...
Summary: I found this on the web. It should answer all your questions about dual booting: It was fairly straightforward...and not nearly as hard as it may seem...
Summary: I have a Dual-boot of Win98 and Redhat6.2. It has thus far ran flawless. Under Windows I installed a Sound Blaster pci128 sound card, Rebooted the mac...
Summary: The only problem with these suggestions is that it will leave you sitting at a DOS prompt, rather than booting into Windows. The easiest way to elimin...
Summary: I have a 15 gig hdd that is now partitoned in C=8.0 gig & D=6.0 gig. In C , I have win98. In D , I installed Mandreak 8.0. The dual booting worked ok...
Summary: Hi, All I am having a problem dual booting WIN98 (factory istalled) & NT Workstation 4.0. Whenever I try to install NT I get the following error messa...
Summary: Hi Mark, I'm sorry I don't have the solution to your problem, but I do want to know how you can create a dual boot setup for Win98 and Win2000 on two ...
Summary: Actually, trvlr, if W2k/XP is installed on a logical C: drive (only drive in a system), it will come up as a C: drive even when moved to another IDE p...
Summary: Hello Friends, I have a problem with installing a dual booting system using partition magic. I have a 8G drive partitioned as Win98(1.7G)Primary;Win98...
Summary: I am trying to reload my system which has dual boot 98/2000. I already formatted drive C: but I seem to be running into a problem with fdisk and getti...
Summary: you really don't need third party utilities like System Commander Deluxe for dual boot. The best part of this procedure is that it will allow you to d...
Summary: MeTa, you can edit your boot.ini manually if you want to. Since nobody else replied here, I'll take a stab at it. First make a copy of your existing b...
Summary: I have a PC with two OS (Win98SE and WinNT) and I want to dual boot. The boot.ini got corrupted some time ago and I don't know the command lines to fi...
Summary: In follow up... You should create C: & D: using Fdisk when prompted select 'NO' to enabling large drive support. You will now havee two drives of 2GB....
Summary: Here is the deal, I have winxp installed on drive C, then I just installed win98 on drive D, now I have no dual boot screen at startup, so I cant get ...
Summary: I made my computer dual boot for win98/win2000advanced server. Some time ago from within win2000 environment, I set my system to boot with only an opt...
Summary: Hi I'm dual booting Dos 6.22, Win95 and NT4. I booted to Dos 6.22 by hitting F8 on start up.I then restarted and found that I could not boot into Win9...
Summary: i just found out why this was happening...i feel so stupid...it was an easy fix...the problem was that i was not configuring my boot manager correctly...
Summary: If you insist on win95 as fat32 Install NT4 on the beginning of the hard drive as NTFS (recommend 2 gig partition) reboot with a Win95b boot disk afte...
Summary: I have never used partition magic before and I am not sure that I understand the instructions very well, I looked at the powerquest website but couldn...
Summary: I have been dual booting Win98 and Windows 2000 for about a year now and it's been working fine. But yesterday I accidently installed a program on my...
Summary: I know many people have posted similair messages. I have just been very or too lazy to actually look at all dual boot problems and reading the res...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
