Summary: How can I boot Win 3.11 and Win98 in the same system ? Somebody have the cake recip? I really need this information ... Is this a configuration in the...
Summary: let me tell you this, i have been trough a hell of a week :p. first my pc crashed dramatically, due to a hardware error, i tried to quickrestore my pc...
Summary: First I'm not sure if this message is in right place, but here goes. I have a coaxial network with few machines, and one laptop with NIC that uses RJ-...
Summary: I want to build a computer dedicated to Win 3.11 and DOS 6.22. I want modern computing power to run the old games. Gates, in his rush to obsolete his...
Summary: I currently dual boot my system between windows2000 and dos/win3.11. I currently have a Nvidia TNT2 card, for which I found dos drivers when I bought ...
Summary: I had windows 95 installed on my laptop and it runned a little slow on the 486 running at 66mhz then i installed windows 3.11 it told me to restart th...
Summary: You should have your DOS installation disks handy. Then, install DOS on the flash drive (or, from a working DOS installation which contains sys.com, s...
Summary: Hey Marco, you should have marketed your assistance because you certainly have a lot of costomers! I'll have to agree with Dave, this site is awesome...
Summary: My system is (don't laugh!) mongrel 486 PC with Award BIOS, 2x500MB hard drives, 16MB RAM, Windows 3.10 (that's what Winver sys) for Workgroups. I als...
Summary: my friend just bought an old 486. how can I install dos and win 3.11 on his hard drive when his hard drive is connected to my computer? I'm running wi...
Summary: Hi, I wand to try to run a network between Win 3.11 (workgroup) and 2 XP pcs. So I used a Fiberline network card but nothing happend. It seems that di...
Summary: Forget what he said above. It won't install without enough memory. You may ask how I know, well, I'll tell you... 1.)I have a 80486DX4/100mhz 16MB of ...
Summary: I ran across an old thread here wondering why people still use win 3.11, here is what I had written and will post it here to continue the theme of the...
Summary: I've got Virtual PC up and running with Windows 3.11 and network all working. My problem is that there is some issue between IE 5 and the S3 Trio vide...
Summary: I'm using Word for Windows 2 on Win 3.11 and do my transfers using RTF. Provided you are aware of format limitations of RTF then it should work fine...
Summary: I doubt whether this is possible; nobody seems to care about making new technologies such as GPRS compatible with old OSes (and, mind you, Win 3.11 is...
Summary: I have problem with one old computer, it has win 3.11 and when i switch computer on it says, that can't find win386.exe and shows me norton commander....
Summary: Hello, I was wondering, I have this rather old computer, with dos 6.20 w/ win 3.11 and would like to bring it to the fast internet, adding it to my ho...
Summary: These posts are amusing to read. To Rich Dennis the user asking about running Win 3.11 on a AMD K6 (not sure how the Athlon part fits into the K6). W...
Summary: I changed the resolution to 1024x768 on Win 3.11, and when I restarted I couldn't get back into Windows and it gives me this error message: "An error ...
Summary: I think my system is posessed or somethig. I am currently running win 3.11 WFW on a 486 33mhz comp. Why is it that when I try to run Netscape Navigat...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
