Summary: My friends comp wont post. We took everything out of it except for video card and hard drive. It still wont POST. I took the harddrive and tested i...
Summary: I have a homegrown AMDK62 500 mHz computer that recently will not post. In other words, on power up, it wont beep and send a signal to the monitor. I ...
Summary: Hi i have the new Epox 8k3a board with an XP1800+. I want to be able to get the fsb up over 140 (which is my limit right now) and im obviously having...
Summary: To (lol) yourmomma: i know that there is a winxp patch update from creative.com and ive got it installed, but my comp still freezes every 25 minutes o...
Summary: Hi I overclocked my old AMD 1GHZ , tryed to get it to 1.2, i set the multiplier to 12x but it only came up as 1.1...weird so I upped the fsb to someth...
Summary: sounds like youve cooked your motherboard. I have an abit kt7a and it powers up even without a cpu installed, but obviously no post on screen, just a...
Summary: Hey “john” Virus infection WAS the point of my post. Because these systems are so different from a hardware standpoint, it is unlikely that they are s...
Summary: my buddy is working on fixing a cusom built pc and is having a bit of a problem. it's got a new mobo and a new processor but it wont boot. everything ...
Summary: ok, i built a computer about a year ago and it worked fine, just last nite i took it over to a friends house and it refused to post, i disassembled it...
Summary: Yeah one very wierd thing is that there is no beeping at all. I'm not to sure if it ever did beep in the first play though. I put the computer togethe...
Summary: Basically my problem is this..when i reformatted my MSI k7 nforce2 MOBO, 2400xp CPU. My computer worked fine...but when i installed my MSI MOBO driver...
Summary: My hard drive was old and made some wierd noises, so I got a new Hard Drive. I put it in but didnt replace the old once so that I could copy files ont...
Summary: I have had a simular problem i whent into Bios and there was a thing to put a password on the power so i thought why not im tired of my dad even touch...
Summary: I'm having some trouble with overclocking my XP2500/A7N8Xv1.06/Corsair PC2700LL(BH-6). I set the multi to 11, and the FSB from 166mhz to 180mhz, and s...
Summary: I had just installed some new ram of higher speed than my old ram and wanted to see what it could do, so I set my comp to 150fsb/mem and put tightest ...
Summary: I tried to turn on my comp but only the fans turn on and hdd light stays on for a minute or two then turns off itself. I am getting no power light at...
Summary: I have an AMD AthlonXP2100+ CPU, which I bought in August 2002. The multiplier is 13x, right? My question is twofold. One, how do I know if I have ...
Summary: intake should always be in the shade, even if its just below the PSU which is pumping out hot air for the fans to drag back in? i dunno what i could...
Summary: I have an MSI KT3 Ultra mobo that had an AMD XP + 2000 that ran as per for quite some time. I'm trying to upgrade CPU's, so I update the BIOS (first t...
Summary: about 5 hours ago i installed a new power supply and a couply of extra fans. My PIII 800EB @ 900 mhz is no longer at 900mhz. As im sure most of you ...
Summary: in case u ask i didnt read it wrong it is INTEC not ANTEC i remember that my firend had a p3 with savage agp card..he remoived the card just to check ...
Summary: i have an abit kx7-333 with an athlon xp1800 i have over clocked this but want to go further the problem is the coreV on the mobo only goes to 1.8...
Summary: i have a computer im trying to build and wont post a thing on my monitor after all the reconnections and thinking, and reading instructions.. and i ju...
Summary: I have 2x256Mb DDR2 sticks in my Intel915G mobo, set to 533MHz. The FSB is clocked at 200MHz and the bus on the chip is 800MHz. I'm thinking of gettin...
Summary: QUESTION:- Hi I overclocked my old AMD 1GHZ , tryed to get it to 1.2, i set the multiplier to 12x but it only came up as 1.1...weird so I upped the fs...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
