Summary: I have a MSI KT7 266 Pro 2 Motherboard, and I can't get the FSB speed to get over 133. Whats the deal? The Athlon 1.4 Tbird is a 266 FSB chip! Can ...
Summary: My computer configuration ------ A7a266-E MB 1700+ XP CPU 128 RAM OS is Windows 2000. Oftenly computer rebooted automatically and BIOS showing this m...
Summary: My Athlon 1.4 at Full load is hovering about 51 to 52 degrees celcius. I was reading in an older forum about this that this is about average that the...
Summary: My Athlon 1.4 Ghz CPU runs really hot, alot hotter than I think it should anyways (idle at about 54 C). I am kinda lost as to what to get. I want to...
Summary: I'm looking to overclock my Athlon 1.4 Thunderbird. However, when i look at the chip, it seems like the L1 Bridges are connected. I thought that the...
Summary: I am in the process of upgrading a GA-7IXE4 motherboard. I have updated the BIOS to F9 and therefore it supports up to Duron 1.3 or Athlon 1.4 The sy...
Summary: Thanks. *Tomorrow i will post exact PSU details. sorry i am newbie to hardwre..that's why.. PSU. the CPU voltage power?. below is my exact problem. --...
Summary: cant get fsb to run at 133 cpu : ath 2000+ mb : ga-7vrxp ram: TwinMos PC2700 333mhz no idea why! when i tried to set the dip switch on the mb and the...
Summary: i have the SAME exact setup. Athlon 1.33, with Shuttle AK31 MB. I have the SAME problem. (runs at 1000mhz only) Seems easy enough to just increase ...
Summary: Why does everything turn into oh my temp is cooler than yours? For one you guys should have picked up that the XP 1900+ is not meant to be run at 1900...
Summary: I have the same system( Athlon 1.4 + Gigabyte GA-7ZXE f7 + 266 FSB) and happy with it except trouble is in memory - It's OK with single sided memory m...
Summary: Abit KT7A-RAID Latest BIOS 7N AMD 1.4 GHz running at 1.3 GHz 100 FSB 768 PC133/100 SDRAM running at 100 This is a weird incident. I have been running ...
Summary: although 50c is a bit warm, if its stable and you don't want to risk anything , that temp is fine. The Athlon 1.4 makes by far the most heat as any At...
Summary: I'm thinking of overclocking my Athlon 1.4, but i have a few questions. 1. How can i tell if the CPU is a 200 1.4 or a 266 1.4 Athlon? 2. My motherbo...
Summary: Hi, I've got a MSI KT4-V-L mobo with an XP1900 and 512mb of 2700 ram in it. It runs rock solid at 100 FSB but of course only reports the cpu at 120...
Summary: Hello, Im having the common "AMD XP" problem, It is running at 1250 mhz and not recognizing the "XP". When I try to set the CPU core mhz or whatever t...
Summary: I recently recieved my dad's old computer and I was wondering hor I would overclock it. It is an athlon 1.4, I have 256 ddr 233 ram. Is any of thi e...
Summary: 45C idle is not that high for XP 2400+. My Tbird 1.3Ghz runs at 67C idle, 74C full loaded and 80C full loaded at summer. If your system become unsta...
Summary: Big Problem!! I've just upgraded the Heatsink/Fan on my Athlon 1.4 from the bog standard one to a Coolermaster Copper Heat Pipe heatsink/fan comb, an...
Summary: Hiya, I have a jumperless socket A GA71XEH mobo. It only has provision to run at 200Mhz FSB, even with a BIOS flash. (I have the latest BIOS version)....
Summary: I have a Athlon 1.4 and I was wondering if its locked. I'm using the Iwill XP333; I changed the multiplier in the Bios setting and the temperature we...
Summary: If that drive is installed on a ATA slot, and you are using a 40 pin / 40 wire ribbon, you will get that message and probably something like "Your DMA...
Summary: That motherboard will only run CPUs with 100-133MHz bus speeds. Your 3.0GHz CPU uses a 200MHz bus, and has a multiplier of 15x. 15x200MHz=3000MHz Your...
Summary: Hey guys, i just put together my first system: Athlon xp 2100 256 megs 2700 kingston ram Aopen AK75 sis 745 (it says it'll support up to 2000mghz cpu...
Summary: Ok i have the same problem bro. I have an Athlonn XP 1600 which runs at 1050mhz. The thing is, the Athlon XP's run at 133mhz ( 266FBS). Some chipset d...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
