Summary: i am connect wireless router to Ethernet Swith for surfing the internet, which cable is used cross cable or straight cable to connect the wireless rou...
Summary: I'm trying to setup an ftp server, but when I tell the server to go online, it tells me that port 21 may already be in use. I tried switching the ser...
Summary: >> "The reason I was trying to mix the 2 is so that I can use a single jack that works for both phone and ethernet." If you mean that you want a singl...
Summary: Hi there, I have a Fujitsu Siemens Lifebook S series with built-in 10/100 MB/s Ethernet LAN (RealTek 8101). I am trying to connect a Linksys wireless ...
Summary: Cat5e patch cable is used to connect a PC to a HUB or patch to wall connector. Crossover cable is used in connecting 2 computers together for purpose...
Summary: Straight thru as opposed to crossover cable. The Straight thru cable is used to connect a computer to a hub or switch, or Access Point. A crossover ca...
Summary: 1. Yes 2. If your going to use wireless then you only need wireless adapter cards in each computer. If you're going to use wired then plug a CAT 5 p...
Summary: I don't know what's doing the NAT. I'm in West Africa -- the local ISP has a VSAT, I'm not sure exactly what method is used to connect clients. It m...
Summary: The best approach to any implmentation is to fully understand the application's architecture. How is the UI delivered to the client? Where is the data...
Summary: Heh - I'll always remember the previous incarnation (and the reasoning behind the name change) but your posts are more entertaining than annoying, unl...
Summary: "Why would it need to be a patch cable in one instance and not the other?" Uplink port. If two hubs/switches are connected together with a straight-t...
Summary: The box you have is correct. That cable is used to connect to a switch or hub. You need a cable called a 'crossover' cable to connect two machines tog...
Summary: I have 2 computers (both are running xp p3 733 256 ram both) and i want to connect them! 1 computer has 2 NIC's and 1 has 1 NIC so the question is wha...
Summary: I want to play old games like doom2 on multiplayer but will newer games work also? I bought a printer port cable for file transferring few weeks ago b...
Summary: So here's the deal. My home was wired using CAT5 for the telephone line. I've re-purposed the wire and terminated them with phone (RJ-11 using blue ...
Summary: Only two kinds of NAT, eh? Not really. Cisco uses the term "static NAT" to refer to what you're calling "1 to 1 NAT": "Mapping an unregistered IP add...
Summary: If you just want to surf websites on the cable, setup a router with web proxy on that address, and configure your browser to use it as its proxy serve...
Summary: I picked up a box of computer stuff, mostly misc junk. I cannot identify this particular box. Approx 3"hx15"wx6"deep. Front panel says "Supervisor PRO...
Summary: One problem with this comparison is completely different systems and requirements. Either can be equally quick or slow dependant upon many qualificati...
Summary: I was wondering what kind of cables your supposed to use for a hub, because I have an Ethernet cable 50 ft. And 2 Straight through Cat 5 Patch cables....
Summary: I dunno what you would use to make that happen, or if it is even possible. you wouldn't have very fast transfer rates(12mbps) plus depending on how f...
Summary: Hi, Ar> ...got the message "a network cable has been Ar> unplugged"... ...the first computer runs win Ar> ME and has the (dsl) modem and a d-link 4 p...
Summary: i get this message "Network Cable Is Unplugged" during an online game session. 4 days ago i started up my pc as usual and straight away started up my ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
