Summary: For those of you searching for a USB to ethernet adapter for a Macintosh, I have managed to locate one. The Jaton XpressNET works like a champ. Wor...
Summary: Hello, I read all the old posts on the fried ethernet card in Imacs as I have one. I recently got a USB to Ethernet connector and downloaded the file...
Summary: Hi, My faithful early iMac has a fried ethernet port for which Apple wants to charge 750$ to replace the motherboard. The only other port it has is US...
Summary: We are on a little 5 mac ethernet network and want to hook a dymolabel printer up to our ethernet hub. It has a usb connection. What kind of connecto...
Summary: Hi, Does anyone know of any products that will allow old Macs to create ethernet connections to that they will connect to a network? I have LOCALTALK ...
Summary: I need to transfer 30meg .wav files produced on my 7600 to a borrowed Compaq Presario laptop. The laptop has a built in modem. Is there a way to trans...
Summary: I just got my iMac back today from a logic board replacement. System works fine, but I tried to connect again to the internet through a cable modem an...
Summary: Hi Can anyone help me to create a connection to the interrnet via my dial up telephone line vi an thernet connection. I have installed a router and La...
Summary: Hello! I have a HP LaserJet 1200n with the HP JetDirect 175x (USB to Ethernet), and i have a Mac PPC 6500 (sys 8.6), without a USB card. I'm going to ...
Summary: My keyboard has a usb connection to my mac and my mouse is connected to the keyboard using a usb connection. After a few minutes of restarting, the k...
Summary: You say you FOUND an ethernet cable? I hope it's a real ethernet (RJ45) and not a telephone cable. ALSO: Make sure it's a PATCH cable and not a CROSSO...
Summary: I put a USB to Serial adapter on a 500Mhz IMAC (OS9.1)to run a HP 870Cse printer. After loading the adapter and printer software, the printer shows up...
Summary: I have an @Home USB to ethernet adapter, but no software driver to run it! I can find no universal drivers for USB to ethernet for Mac. Are there...
Summary: Hi All, I want connect a PCI/ISA compatible card to a PC slot, which is remotely located. Is there any direct connection methods through cable extent...
Summary: I have a problem connecting my Mac to my hardware Rip Star 800NX.(which I need to run my imagesetter). I recently fomatted the harddisk from the Ri...
Summary: I want to connect a HP LaserJet 6P printer with a USB-to-parallel cable to my G4. I'm using OS 9 but the printer is not detected. What dirver do I nee...
Summary: I recently purchased a USB to parallel printer cable to connect my LaserWriter Select 360 to my iMac, using the LaserWriter's parallel port and one...
Summary: I have acquired a laser printer HP 4000 which only has a parallel port. Can I just get any USB to IEEE 1284 (parallel) cable from ebay? Or are th...
Summary: Was wondering if anyone knows if there's such thing as a USB to ADB adapter? For instance, tho be able to use the new optical mouse on an ADB-based Ma...
Summary: The first thing you should do is check which router you've got and phone them to get the IP address for that router. Then if it's connected to the e...
Summary: OK I got the modem to work off the ethernet hub BUT I can not get the printer (Laserwriter select 360 going to a farallon device which is then conv...
Summary: I have got a 4 port etherbnet router and want to add a printer sharing connection to it. I beleive I need a USB to ethernet hub? Then do they come w...
Summary: Well, the issues that you're having are consistant with a bad ethernet port, and if this is the first time you've tried to use it since the mobo repla...
Summary: I gave that a shot but still no cigar. It started processing the print job, then said "Will retry in 5 seconds", then 10 and so on. The activity lig...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
