Summary: I put Win ME on an old PC and I think the only thing that didn't work properly was the Media Player. If it's old, you will probably find it has EDO ra...
Summary: Here's part of my original post; two separate follow-ups can be found toward the bottom. Specs: Compaq Deskpro 4000 w/ Pentium w/MMX 4GB HD 32 MB RAM ...
Summary: Here's part of my original post; the follow-up is at the bottom. Specs: Compaq Deskpro 4000 w/ P w/MMX 4GB HD CD-ROM & 3.5" Network card built into th...
Summary: I just bought an old HP Laserjet III from work, took it home and hooked it up. I'm running Windows ME and no matter what I do, the thing won't print. ...
Summary: Hello: I have an old hp system running WinME as an upgrade to Win98. The system had become very slow for the past month when last week i started the s...
Summary: I have an old hp that I had xp pro on it and all it did was lock up and was pain in the butt. So in my aggrivated state I reformatted the HD and proce...
Summary: Will someone please help!!! I need the following files to run an old HP Printer with Windows ME. FINSTALL.DLL, ICONLIB.DLL, UNIDRV.DLL... DOES ANYO...
Summary: i have an old hp pavilion tower and i bought a new monitor because the original one broke. now everytime i start up my computer, that message that say...
Summary: It sounds like a hard drive problem to me - I had an old HP that had a bad squeal it drove me nuts - it was the hard drive - a bearing was going bad t...
Summary: Tim, I had a similar problem with an old HP printer driver I had where I had uninstalled it using 'Add/Remove', tried to turn it off with msconfg, cle...
Summary: Most of this stuff can get working. It takes looking for drivers and so forth. I have an old HP scanner I got working with ME. It was a major hassl...
Summary: We have an old HP Office Jet 500 printer/fax/copier/scanner that is going out to the street. We would like to get a laser printer with the same four ...
Summary: If you're lucky, it means that the data stored in CMOS has been corrupted - things like power outages and rebooting while writing data in setup can ca...
Summary: I ahve an old hp e45 netserver running as a stand alone pc. Win ME and 192 mb ram. 4.2 GB scsi. But Win ME ONLY sees 2.1 gb of HD ? Any ideas ? All di...
Summary: Will someone please help me!!! I have an old HP IIP plus and need the following files, FINSTALL.DLL, ICONLIB.DLL, UNIDRV.DLL for WIN ME. Does anyone...
Summary: I have recently installed an old HP DeskJet 855C as a network printer on a network that includes XP, Windows 2000, ME, and Windows 98 computers. The p...
Summary: If you're going to do a clean install of 2000, format the hard drive. The only reason to not format the drive would be for an upgrade. If you decide t...
Summary: "Install a Lexmark based printer and you will start to have some problems" AMEN! Any advice on a inkjet printer? Light duty.. mostly for printing webp...
Summary: I also have sorta the same problem: mmkeybd.exe caused an error in user.exe My machine is a hybird of new components and old HP ones, like the monitor...
Summary: I am posting this message for my friend. He has a brand new computer with 1gighertz, 60gig, cdrw, ME,pentIII, 56kmodem. I do not know the make of th...
Summary: I just bought a new PIII 500 chip. My system runs under Windows ME. My motherboard (BX6 V2)has an old bios version that do not support the Pentium III...
Summary: I've tried running setup.exe from the CD-ROM AND from the HD, as other posts on Computing.net have suggested. Still, no luck. I would remove the ethe...
Summary: I have Photoshop 5.5 Professional and don't much care for it. I always used Photostyler 2.0 SE to edit pictures. This is an old Win 3.1 program, But ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
