Summary: my friend has this emachines with a stock processo that is an intel celeron, im not sure exactly which one, im too lazy too look at the front of the c...
Summary: Hey all - it's me again. Well after previous posts, trying to find some help to this problem, I am back once again. Originially in my computer, I had ...
Summary: Unknown problem. Maybe somebody can help. I built a new system, and after first heating and cooler problem, now I have temperature about 55 C, max. 60...
Summary: Ok.. long winded problem.. but I'll try to cut it short- Using the exact same hardware on a win 2000 machine seems to lockup and crash on a newly inst...
Summary: Since I installed a Inno3D Geforce 2 MX-200 PCI 64MB graphics card, I have had no sound. I have check that the drivers are installed for both my onboa...
Summary: Hya After a Win Me system crash, lost audio (graphics, mouse pointer etc - but these are ok now). I have J-530BF board with on-board (SiS530/5595 and)...
Summary: AD 1812 audio codec is listed in system as working properly but in multimedia it is not listed. In multimedia if I click on devices and then on my sou...
Summary: I recently had a WD drive that kept loosing the formatting on the C bootable portion(10 Go out of 40 Go).I tried the Lifeguard utility to write zero's...
Summary: As I understand it there should be no single POST Beep with RAM removed, but there could be another BIOS Beep code for Memory problem. Open the case a...
Summary: Image locked by bios is an unknown problem. Are you sure it said that? I might be tempted to use copy or maybe robocopy to return all the peices to ...
Summary: And you've swapped out the video card? I think the only thing left is some unknown problem with the motherboard. You might try bench testing it; that...
Summary: First of all, as far as I know, I'm not a computer newbie. I know bits and tricks that should qualify not to be treated like one. So before I start le...
Summary: PC previously had Win98 on it but now needs upgrading to something better to make use of broadband. Anyway, tried installing XP & got error message p...
Summary: Hello, my HDD has been acting weird lately, and I am wondeing what's going to happen to its fate. Since I use a IBM T42 Laptop, it would be pretty ba...
Summary: I would appreciate help ASAP with this issue because the computer concerned belongs to my mum and she is getting quite emotional about it. I’ll be a...
Summary: The problem is not always caused by a RAM problem. The exact symptoms can telltale not enough processor voltage (Vcore). I had the exact same type of...
Summary: Martin, Sorry for the delay, been away. OK you have a Adeptec 2930CU. I have 2920's here (3) and a 2940 so am bit unsure about your card. Never...
Summary: Ok, here is a doozy for you guys. I have a visioneer 9020 USB 2.0 scanner hooked directly into my computer motherboard usb 2.0 port (asus a78nx deluxe...
Summary: Hi, This is my first time using MCE 2005. I got my copy from newegg with te rollup. It has been pretty unstable and I don't know why. first off, spec...
Summary: The drive no longer appears in disk management on the original computer as it did before the cloning. As far as showing up in the bios, that's a vague...
Summary: "The hard drive in the computer had the operating system and everything already on it because I didn't want to lose anything." If the new mboard has h...
Summary: I'm currently running an athlonxp2200 w/256MB pc2700 ram on an ECS L7VTA Motherboard, with a Gainward Geforce3 video card. The problem I am having is...
Summary: How do i check the ide channels are enabled? Also i still have the problem s with everything? The usb hub for my monitor seems to come up 'unknown de...
Summary: Hello! I am having a problem with a 486 PC that I bought at the thrift store for $6.88... I want to put two HDD's on the machine...but I can't!! when ...
Summary: I recently got a new computer, it's specifications are as follows: -Pentium 4, 2 Gigs -Intel Motherboard -Western digital hard drive, 100 Gigs If any ...