Summary: i need help... i originally had windows 3.1 on my computer, then upgraded to 95, then to 98... well, after adding an extra hard drive, the computer wi...
Summary: My hard disk cannot boot , after I fdisk the C partition and set it active, form a WIn 95 boot disk. It prompt me the message "Invalid system disk" . ...
Summary: I am having trouble with the IDE controller(s) and the IDE CD-ROM drive on my Presario 9546. The Floppy controller and both IDE controllers have the ...
Summary: Hi my name is Farrukh i would like to know how to fix a Cd Rom Drive when it is stuck could u please hwlp me because of that i cant play and cds becau...
Summary: Working on an Win95 PC that would only boot in safe mode. CD was not working in either OS or Win. Went to the Mitsumi site and downloaded the DOS driv...
Summary: hi there i have a seious problem when the computer boots up it says ATAPI IDE CD-ROM device driver version V1.22A error unable to detect ATAPI IDE CD...
Summary: rac 1. Master on the secondary IDE connector 2. As a Slave to the primary HD? Number 1. Connected straight from the CD-ROM Drive to the MB. Number...
Summary: I have a 80486DX2 with 8MB RAM and a CD-ROM DRIVE. I just formatted my disk. When I try to install Windows 95 it says 'setup found a currupt cab file ...
Summary: It's a standard & inexpensive computer component - look (or ask ) for an internal IDE CD-ROM drive (probably don't even need to be that specific) Acco...
Summary: i just changed my cd-rom drive. i.e.yanked out the old one and put a new one in all the right cables, wires, etc. that were attached to the previous o...
Summary: NO TWO CD ROM DRIVES CAN WORK ON ONE CABLE WITH ONE AS THE MASTER AND THE OTHER AS THE SLAVE YOU NEED TO SET THE CD-ROM DRIVE AS THE PRIMARY SLAVE TO ...
Summary: you do not say the OS you are running. the cd rom does not have to be recognized in the bios to run in windows. it it a real ide cd rom drive? it is m...
Summary: last night I installed a software onto my computer. After reboot, it froze my computer after five minutes of using that new piece of software. Ctrl+...
Summary: Have a UMAX Laptop w/Win98. Unable to use the cd rom "CD Rom drive is not accesible". Noted a splat next to the Mitsumi cd rom controller in device ...
Summary: It is normal behavior. Windows will detect the new cdrom with windows drivers. To detect the cd-rom in dos you need a dos driver for the controler the...
Summary: My CD Rom drive started to be unreliable, so I removed it and replaced with my spare quad speed drive. I cannot get the system to re-boot. Part of the...
Summary: HELP! I am encountering a problem trying to install Windows 95 full version to my formatted hard drive from my cd-rom. I have been using a Win98 boot...
Summary: Whenever I try to access my cd rom drive I get the following message Required K3222222.DLL file not found Any idea what I should do www.Hythum.frees...
Summary: I want to map my CD-ROM drive from my other computer so I can play a game using that CD-ROM drive but I don't know how to set it so that my computer r...
Summary: I cannot seem to make a boot disk which will allow me to access the CD-ROM drive while in DOS from rescue process. I read the latest Smart Computing m...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
