Summary: I need some help. I have a small network of 15 computers. I have a NT 4.0 Server SP 6 with two of the same model isa 3com network cards installed in ...
Summary: Does anyone know how to install a 3Com 3C509b-TPO card in a DOS 6.22 machine... I have an old DOS machine that connects to a Novell 4.11 server...whic...
Summary: I have installed two network cards in a [H/W] RAID server, running NT and want one IP address to be accessable to the Internet and one to be confined ...
Summary: I had two network cards installed in my computer when running the Windows ME. All went like a breeze. The integrated card had the 194.x.x.x IP and was...
Summary: A better tool is WebJetAdmin (use version 5.5 or above, available free from HP). This is a browser based tool (it requires IE), but dosn't need to be ...
Summary: I unfortunately am only working with two computers so I am limited as far as my testing and troubleshooting. I am using 3COM 3C509B Network cards for...
Summary: I am having a problem installing 2 network cards in my NT Workst. When I install the second card, everything is fine, until it asks me to put it o...
Summary: Hi, I'm looking for some advice on how I could install two network cards on an NT workstation. One card is already hooked to an existing token ring ne...
Summary: I have a box with Windows NT Server 4.0 ( Service pack 4) running with two network cards. I would like the box to act like a router, routing between t...
Summary: after I setup nt workstation4.error msg show one service failed.actualy is my network card. my network card is 3com etherlink III ISA 16bit.I go...
Summary: I have a 3Com Etherlink ISA(3C509) network card that I like to find the DOS drivers for. I'm using Norton Ghost Software and I need these DOS drivers...
Summary: Hi, I'm working on a Compaq Deskpro 2000, with NT 4.0 and SP4. I just installed NT on it and am having problems getting my network card to work. It is...
Summary: Make sure you have the right drivers for your 3com NIC. What you have to do is once you have the card in your which ever slot in your machine and you ...
Summary: I have a box with Windows NT Server 4.0 ( Service pack 4) running with two network cards. I would like the box to act like a router, routing between ...
Summary: Hi, I've installed two cards in NT4.0 server in two different subnet(i.e 192.168.101.1 network 'A' and 202.79.33.1 network 'B'with 255.255.255.0 as ma...
Summary: I am having a little difficulty install my NIC in my computer. I am running Windows NT 4.0 workstation service pack 6. I am trying to install a 3Com...
Summary: We have a strange network problem on our LAN. At certain times (randomly) our network clients seem to lose their network connection to a server, when ...
Summary: There were two 3Com drivers in Devices and one did not seem to be connected to a network card in the computer and thus the message in Event Viewer. T...
Summary: Hi I have very weird problem with installing network card on NT 4 I tried to install xircom RE-100 on Toshiba laptop but with no success! i installed ...
Summary: I just installed a 3Com "3C509B-Combo" NIC in my Windows NT 4.0 workstation service pack 6 box. I have not run any cable to it. I am curious though ...
Summary: I have a problem with two 10/100 Ethernet Cards in an NT 4 Server, not being used for Routing. Each card has its own IP on the same subnet ***.***.***...
Summary: Hello All I have installed windows NT 4.0 with service pack 6 and option pack 4 in my computer on fat partition and i have inserted two pci realtek 80...
Summary: I have a longshine LCS 8634P network card, I'm trying to get it to work on NT4 SP1. When first inserted it appeared with a IRQ conflict. Now with this...
Summary: Hi Guys I just wonder if you can give me some directions or guidelines, I am going to re-arrange our network and is thinking what's the best way o...
Summary: We have a strange network problem on our LAN. At certain times (randomly) our network clients seem to lose their network connection to a server, when...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
