Summary: I want to transfer one win 98 hd to much larger one,,,,would like to know the easiest way to accomplish this thank you for any help trophy30...
Summary: I am currently running 2 HD's. 120GB for all my programmes, and 40GB for storage. I want to upgrade to 2x250GB. I really don't want to format and rein...
Summary: Davincaps. thanks for that link, a great source of info. Wonder why when a search is done on the Seagate site they do not include the ftp site in thei...
Summary: But if you do put on the HD's as primaries and CD's as slaves, I heard somewhere that since the CD's at most run at ATA33, the drives will also run at...
Summary: I have been running with one master HD and one slave HD for a while now. The master is connected via Serial ATA and the slave is connected via IDE cab...
Summary: Hi..Have 2 20Gb HD's..used Ghost last night to clone Drive C to Drive D..now-how can i get into Drive D to run it?..is there a software program i can ...
Summary: I've a general question that I've not come upon in XP yet (but am planning to encounter it) I intend to place a second (fresh/unformatted) hard drive ...
Summary: Trios make a device (I have one) that allows three HDD to boot from. You plug all three HD's in and set them to master. You then plug the one IDE ...
Summary: Putting 2 optical and 2 SATA HD's on an ABIT IC7-G Max II Motherboard. Has 2 IDE channels that can run 2 drives each, and 4 SATA channels. BIOS is AWA...
Summary: I have an old gateway. It has a dvd burner, dvdrom drive, floppy drive, tv tuner pci card. I'm going to add a pci to USB 2.0 card soon. I don't hav...
Summary: Setup: MoBo: ASUS P4B533-E (with RAID) OS: Win2000 2 HD's connected to the primary IDE channel 1 DVD-player connected to secondary IDE (Master) 1 DVD-...
Summary: I am about to have someone install two interal drives on my system. My 250GB will be the master and a 120GB will be the slave. I will use the 120 fo...
Summary: Yes, power cables are connected, hard drives are spinning up. IDE Controllers - ? I checked Bios, ide drives set to auto. Using 1 ide channel, other h...
Summary: Hey. Nasty problem. I recently took a Maxtor 60GB HD out of one machine and put it in as the primary slave in another. Now when I boot the BIOS detect...
Summary: Okay... I've tinkered with building computers for about a year now and have successfully built a few... but I don't have much software smarts and have...
Summary: ide, p-ata, can theoretically transfrer 100-133MB/sec, where s-ata is up to 150MB/sec. These values don´t anyhow mean very much today, because the bo...
Summary: Hey guys, I'm having a problem with my system. I bought a seagate external 200 GB hard drive back in the summer and whenever i attempt to transfer fil...
Summary: I recently had to format some Hard Drives and i really find it time consuming and bothersome to install the same apps over and over again, same settin...
Summary: i like real silent HD's, if the maxtor's FDB's quiet and has no problem i'll go with maxtor. though, i really need speed, that's another big issue. I ...
Summary: OK, here's a stumper. I just put in my new 80gig WD HDD with Jumper to master and my other 40gig Maxtor with Jumper set to slave. Everything is au...
Summary: OK OK.. I have a few builds under my belt but am coming across something I have yet to do. I just ordered a Maxtor Ultra 200GB HD (8M/7200RPM). I am ...
Summary: Hey all-- I'm wondering if I have enough power to run a second HD on my current 350W power supply. It's an Antec case, so that rating should be fairly...
Summary: I really appreciate all the help but I 'm not getting you to understand my situation. I have tried 2 differant HD's 2 sets of memory and run fdisk& ...
Summary: Didn't change jumpter, os is both WinXP Pro, size 60gb arrg I really need help... look all the 4 things connected on the IDE cables (hd, ls-120, cd, c...
Summary: If one were to physically transfer an unformatted HD from one machine to another, would one encounter any problems? If so what kind of problems would...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
