Summary: What exactly is the problem? Would you like to exchange the harddisks from SCSI to IDE or what would you like to do? Please send a reply, if you solve...
Summary: I am new to Novell and have inherited a 4.10 server with a single 13 gig. IDE drive. I had another identical 13 gig drive that I would like to mirror...
Summary: Have you patched NW 5.1? Are you using SCSI or IDE drives in the server? Check the versions of your controller software and also check the date of y...
Summary: Boot off of the second drive and load the novell loader. You did not say if you were using SCSI or IDE drives. If you are using IDE, set the 'new' D...
Summary: to use IDE the server has to have an IDE controller, can't put IDE on SCSI controller, or vice versa. IDE controllers are pretty cheep, get one for t...
Summary: i have a novell server on a compaq proliant 800. the 2 mirrored SCSI hard drives in a raid format quit working. Just Novell Netware 3.12 and data was ...
Summary: I'm about to do a replacement of a SCSI drive, which is the 3.12 boot/sys: volume, with a new IDE (old SCSI is making noises). My plan is to just add ...
Summary: Firstly, I'd like to thank everyone at computing.net for all the help. I find this site to be one of the most helpful when doing computer work -- and ...
Summary: I had a lot of problems installing 5.1. I was using IDE drives. It turns out that the IDE drivers shipped with the 5.1 software were bad. SCSI driv...
Summary: Using Windows 2000? Here's an article from Microsoft support site: SYMPTOMS If you install Windows 2000 from a CD-ROM to a 20-gigabyte (GB) hard disk ...
Summary: The Drive actually works fine. If a refurbished model exists, the there must be some drivers or help for this model out there. We have a working dri...
Summary: We are running WinXP SP1 Client with the Novell Client 4.83 SP1, with a Novell 5.1 Server. And when a client is working in Excel 97 and trying to save...
Summary: Hi, It makes no difference then the Windows situations. I would prefer to make the second disk the secondary master for fault tolerance and performanc...
Summary: I have two seagate barracuda 18gb scsi ultra wide drives. Same model numbers. One drive has netware partition of 17366 Mb, with data on it. I want to ...
Summary: I have posted this answer already 3 times. It sounds to me that during the installation process the needed drivers for your IDE/SCSI devices (disk dri...
Summary: I have a netware 5.0 server, with an 80 Gig SYS colume, and a 360 Gig SYS2 volume. All drives are ide, 80 Gig standalone, and 3 x 120 Gig making up th...
Summary: We have a NW312 server, 1GB SCSI-2, been running for 6 years and not a glitch, except running short of space, is there a quick and simple way to upgra...
Summary: I'm trying to install Netware 6 onto a box with a 200GB IDE drive. The BIOS recognises the hard size correctly, but when I create the boot partition i...
Summary: Don't use or expect Windows to map drives. Put mappings for everyone in container login script and mappings for users in user login scripts. Alot easi...
Summary: you are working with ide drives and you can't expect more speed. I'll bet they are ata33 and not ata100/133. No settings to make drives faster that ...
Summary: I would launch the SCSI config and see if it sees the card. You can usually get into the SCSI config during boot-up by pressing keys instructed on th...
Summary: if users cancel the login, programs on C: work fine but if they log-in, error messages popup about restricted access. How can I give full rights to t...
Summary: Hey GuyZ We have Novell 5.1 and ZEN 3 and two computers in a lab are not seeing the Secondary IDE controller. I check basic cables and drive and swap...
Summary: Excel 97 on windows 98 PC connected to Novell server and mapped network drive. The Excel 2000 files stopped saving files on the network drive F. I ca...
Summary: Just got a new replacement Dell PC and installed the XP Netware client. I can connect to the server but my F (SYS) drive shows the files on my H (VOL1...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
