Summary: Ok I am once again installing OS/2 (after 2 years) as i now have a test machine I created the three boot disks using the cdinst command but as soon a...
Summary: The Virtual Doctor and Computing.Net (which have been the same site for over a year) have split up due to differences between myself and the operators...
Summary: p3 733 mghz 128 sdram 20 gig hard drive ok here's my problem , i accidently knocked my pc when it was booting up , the hard disk stopped working and i...
Summary: Found this: Easy networking with OS/2 Yes, it's even easier than you thought! Networking OS/2 isn't black magic like many people think. It has the sam...
Summary: I'm having trouble with my WINDOWS 98. an error always shows up "Fatal Exception OE XXX in VXD"; and sometimes when i try to use any MSOffice 2000 fun...
Summary: I am trying to setup a network connection between a PC running OS2-4.0 and a PC running WIN95. I have managed to get the TCP/IP protocol working (ping...
Summary: I installed OS/2 Warp V3 on an old 270MB SCSI disk (plenty of space!) yet after the first 6 disks (when it tries to load the OS) I get an error "SYS0...
Summary: Gopal: I can't say anything about your mouse error. On the other error, I do have some input though. I was playing around with an old IBM with a Sure ...
Summary: everytime I try to boot os/2 1.0 or 2.1, from a boot disk, it gives me this error: trap 0000 a bunch of memory dumps The system detected an internal p...
Summary: After successfully installing networking between my Warp 4 box and NT 4 box, I took the plunge and acquired ADSL service. Out with my hub and in with ...
Summary: I am trying to setup a peer to peer network between a PC running OS2-4.0 and a PC running WIN-95. So far I managed to get the TCP/IP protocol to work ...
Summary: Hello Here is the senario: There are 2 servers, Primary and Standby Server. Both are connected through a high speed cable using a Vinca StandbyServer ...
Summary: The controller locks up intermittently on morning boot with the following: EXCEPTION IN DRIVER :A: TRAP 000d ERRCD=00 ERACC=**** ERLIM=******...
Summary: Hi, I have the same error message appering on my startup, however i did not change my hdd or change any programs on my pc. I just turned the power on ...
Summary: HELP Here is my system configuration: Win95 mmxII 1 hard drives. Win 95 on drive C with no extra partitions 32 megs of memory This is how the problem...
Summary: Hello to all... I'm trying to install OS/2Warp ver 3 on a CPQ PL2500. I've had no luck from Compaq with this, they've long since forgotten about ver3....
Summary: Trying to install XP on an abit BP6 dual 433 celeron with Samsung SV6004H (60GB) on primary master of onboard IDE (not the HPT366). Installation goes ...
Summary: Hello guys, I am having a problem with OS/2 Warp version 3.0. I am new to this operating system. I tried to install a NIC card and I am getting this c...
Summary: After realizing that my Warp 3 installation diskettes have become corrupted over the years, I am attempting a Warp 4 install. The problem is, after fo...
Summary: Hello! I'm having A LOT of trouble getting my PC to work *correctly*. I'd like to have Win98SE (8G FAT32)/RedHat Linux (2G + 64MB swap)/OS2 Warp 4 (2...
Summary: In the list on system setup > system setting > screen, there is only 640x480x16, how can I increase the color depth and screen resolution in OS/2 Warp...
Summary: I am running OS/2 and it has 2 partitions. The primary partition is the C: Drive and it is formatted FAT with 60 MB the drive is a total of 120 MB the...
Summary: Hi guys. I've managed to get warp connect installed and networked to my win98 pcs. Just one problem, I cannot access the Win98 shares, with a access d...
Summary: Hello all of a sudden our os/2 workstations does not boot. Gives error "A kernal file is missing from the disk. Insert a system diskette and restart...
Summary: Hi, my computer is equipped with an EIDE-drive (20.5 GB) and an UW-SCSI-drive (9.1 GB). OS/2 Warp 4 is freshly installed and serviced to fixpak 13. Wh...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
