Summary: I need help swiching from my windows 3.1 interface to windows 98 interface. I had a problem in windows 98 when i had a invalid page fault when i boot...
Summary: Ok I have an Idea but I'm not sure if it will work I have a Computer that I want to restore for my Son The only problem is that It has Win 3.1 . Its ...
Summary: I want to transfer my entire win3.1 computer(both drives of the win3.1 computer) to my win98 computer. I've discovered that drive copy 1.0 supports wi...
Summary: All computer masters, please HELP!!! My laptop is running Win 3.1, and has external floopy and CD-rom drive, both are parallel interface. I want to ...
Summary: You can successfully install and run Win 95 on about a 345 MB hard drive. Bigger than that is better. My recommendation would be to have at least a 40...
Summary: Hello -- I have a friend of mine who wants to upgrade from Win 3.1 to Win 95. I have my old 166 MHz Pentium motherboard w/ 64MB RAM which I'm going t...
Summary: Hi tara: First make sure you have all the programs you want to re-install to Win 95 before trying upgrade. I never use upgrade OSs myself, better to u...
Summary: I would like to upgrade from windows 3.1 to wondows 95. I don't know what system requirements I need or if I need some great knowledge to so it. Ple...
Summary: WE are trying to upgrade a 486 win 3.1 to a win 95. We have the full version of 95 (boot disk and CD) We aren't sure how to wipe out the 3.1 version t...
Summary: I have a win 3.1 computer. It's probably time for me to move on to a new computer but presently I can't afford a new computer. I need old disks t...
Summary: I'm trying to connect (Dial-up) a windows 3.1 machine to a WinNT workstation set up as a server. I can connect to NT using Win98, Win2000 and WinNT. H...
Summary: Trying to help a friend. system running win 98 would not do anything. thoght I could instlall win 3.1 and then reinstall win 98. hung up when trying ...
Summary: Hi BRING: You might want to look into LapLink or PC Sync to transfer data from one PC to another, don't know if it works with Win 3.1. Good Luck. Z ht...
Summary: I have run this box for twelve years (It started as a 486DX33 with 4Mb and 170Mb disc. Those were the days!), and now want to start a home network ...
Summary: Hi Michael: I believe the first problem is that Win 3.1 needs to work with DOS 5 through 6.22, another problem that you might have is if hard drive is...
Summary: Hi, I have been asked by a teacher at work (where I am the it tech) how to remove progs from Win 3.1 It's been ages though since I used this version ...
Summary: Have a 486 with win 3.1 want to use the internet. Is there somewhere I can download win 95 and reload it in my 486 and then get can a free isp? I kno...
Summary: Hi, I'm trying to upgrade a friends PC from Win 3.1 to Win 95. I have the Win 95 CD, but when I try to use it I get a message telling me I need to us...
Summary: I'm helping a senior fix his system. I do not have Win 3.1 to reinstall but do have Windows 3.1 for Work Groups. I'm concerned about losing data and ...
Summary: I'm trying to upgrade from win 3.1 to win 95 on my magitronic 486. When I go to file, run, and type D:\win95\setup I get a message saying it cannot f...
Summary: Did you install your driver from Dos or Windows? Use the Run command on your desktop to install from Win 3.1. Also check the path to mscdex.exe. Most...
Summary: I have the following spec machine and plan to upgrade win 3.1 to perhaps Win 98 or Win 2000. I realise I may not have the memory / processor required ...
Summary: Can anyone tell me the easiest way to transfer large files from a Windows 3.1 machine to a Windows 98 machine? Is there a way to directly connect the...
Summary: Have you tried installing the Signlab software on WinXP? It may work if you run it under Windows95 compatibility mode (or even without using Win95 co...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
