Summary: I have a Maxtor 6gig HD that heats up so much that it can't be used at all. I can't even get Windows to see it. It takes about 15 sec for the biggest ...
Summary: Im running windows 2000 only, i want to know if i can switch my hard drive with a blank one and install winxp on it, and be able to switch back to my ...
Summary: Thankyou for helping...this is my origanal prob we love tofilm from my digital camera,home videos..{good ones]and the 300pl keeps saying there isnt en...
Summary: When switching up motherboards, is it possible to just disconnect your hard drive and plug it into the new board? I heard someone saying the other day...
Summary: Hello, I have a system that I built that includes a Gigabyte GA-7ZX motherboard, Athlon 800 chip, 128 MB RAM, new Maxtor 80 GB HD, Microsoft Wireless ...
Summary: i just bought a mb ...i have an old case and therefore old power switch/hd led/reset...etc...wires. they dont fit the new panel1 arrangment on the mb ...
Summary: If memory serves me correctly you will need to find the correct driver for you highpoint controller and install it before you can boot you OS. I used ...
Summary: Can you remove the sides from the case and see the rear of the power button ? If so, use small insulated needle nose pliers (or paper clip) to short t...
Summary: i have 3 stick.. sdram... all umm.. 64 i think.. all 120 ish .. whatever that number is.. see also .. the thing that doesnt make sense. is .. if it w...
Summary: to clarify --- My original system had 2 IDE connectors on the mobo and 2 hd's and 2 optical drives. I now have a new MOBO with only 1 IDE connector. (...
Summary: In the 2'5 HD there are jumpers, although not listed as master or slave, but I assumed "device 0" was master and "device 1" was slave. I tried seconda...
Summary: In addition to the standard ATX power connector, which it sounds like you have connected, there are two pins for the power switch on your case, these ...
Summary: I've got a weird problem with a system I've just built for someone. If the system has been turned off for an hour or more, you have to flip the power...
Summary: I can not for the life of me get my 2 hardrives and a cd rom to boot up at ALL if I hook them all up. I have an IBM Aptiva (model 2170-24U), with an ...
Summary: Hi I want to find a switch that allows me to cut the power of the "hard drive" before I turn on my computer, so what switch is suitble for this task? ...
Summary: well i bought a new hard drive (MAXTOR 7L250S0 MAXLINE III 250GB 7200RPM 16MB CACHE SATA ROHS) and tried to install it, i put it, plug the sata red c...
Summary: Ok, had some time to work on it....I tried everything you all said. The hd is detected by the cmos however the cd-rom is not. I used SABERTOOTH'S ad...
Summary: I have a 500gb cavalry external HD. I use it to store videos and other bulky files to keep my poor 80gb laptop free. It was working fine last night ...
Summary: Well, I was putting toghter a computer. Everything was assembled correctly, but the computer will not start. The HD LED was light up (orange) but swit...
Summary: The HD died in my old laptop, so I switched the laptop from another computer into my old one. For some reason it does not detect it in the bio at all....
Summary: thank you for your reply. the thing is that ive got a cd writer as master o the second channel. now ive managed, switching jumpers to, have my cdrom a...
Summary: ok, heres my dillema. Here is my old set up: 1.66ghz Athlon 20 gig HD (master) 120 gig HD (secondary) The rest is pretty negligable. what i wanna do ...
Summary: I currently have an Intel system but have received an AMD MB and processor I would like to switch over to. I am curious about the best way of going ab...
Summary: Due to my old computer refusing to switch on, and the fact that I need to get at its HD data urgently, I wondered if it was possible to transfer the o...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
