Summary: Davincaps. thanks for that link, a great source of info. Wonder why when a search is done on the Seagate site they do not include the ftp site in thei...
Summary: Thank you all for your responses. First, I already have an 850Mb HD which recently failed, and I want to replace it with as large a HD as I can. Also,...
Summary: I've a general question that I've not come upon in XP yet (but am planning to encounter it) I intend to place a second (fresh/unformatted) hard drive ...
Summary: I am going to upgrade a HP a350y. I want to put in a more powerful graphics card. I am hoping to put in a AGP, was wondering if anyone new the spec's ...
Summary: what's the max hd size for my motherboard ? it's a TUSL2, it supports ata100(hope that helps). the asus site does not say the max size !!! ...
Summary: Today's hard drives merely sip power. I wouldn't worry about it at all, considering that your CPU and video card aren't too power hungry and that you'...
Summary: I have been running with one master HD and one slave HD for a while now. The master is connected via Serial ATA and the slave is connected via IDE cab...
Summary: Hi..Have 2 20Gb HD's..used Ghost last night to clone Drive C to Drive D..now-how can i get into Drive D to run it?..is there a software program i can ...
Summary: Trios make a device (I have one) that allows three HDD to boot from. You plug all three HD's in and set them to master. You then plug the one IDE ...
Summary: Putting 2 optical and 2 SATA HD's on an ABIT IC7-G Max II Motherboard. Has 2 IDE channels that can run 2 drives each, and 4 SATA channels. BIOS is AWA...
Summary: I am currently running 2 HD's. 120GB for all my programmes, and 40GB for storage. I want to upgrade to 2x250GB. I really don't want to format and rein...
Summary: hi, anybody know where's the supported cpu list for the above board? its not stated on the manual and abit's website. i just need to know what's the h...
Summary: Setup: MoBo: ASUS P4B533-E (with RAID) OS: Win2000 2 HD's connected to the primary IDE channel 1 DVD-player connected to secondary IDE (Master) 1 DVD-...
Summary: I am about to have someone install two interal drives on my system. My 250GB will be the master and a 120GB will be the slave. I will use the 120 fo...
Summary: i first tried to reformat both partitions. this made both partitions unable to be used (couldn't copy files to either partition). i then used the WD ...
Summary: Yes, power cables are connected, hard drives are spinning up. IDE Controllers - ? I checked Bios, ide drives set to auto. Using 1 ide channel, other h...
Summary: Do you really need a quad core CPU? The P45 chipset is kind of the new kid on the block. It doesn't bring much to the table over the P35 other than PC...
Summary: But if you do put on the HD's as primaries and CD's as slaves, I heard somewhere that since the CD's at most run at ATA33, the drives will also run at...
Summary: I have an old gateway. It has a dvd burner, dvdrom drive, floppy drive, tv tuner pci card. I'm going to add a pci to USB 2.0 card soon. I don't hav...
Summary: Yes it "looks" like that one and I am sure that it will fit the enclosure. But That part # is 5E692 I don't know what the difference is and if I will ...
Summary: Take a look on the website of the manufacturer of the motherboard - there is usually a list of supported cpu's for your model - you may need to flash ...
Summary: hi i gonna setup a raid with 2 HD's (for the first time) but iam woundering whats is the blocksize that u have to choose between 16k , 32k ,64k ect.....
Summary: I use all my old 8gb 20gb 40gb and 60gb HD's for the primary HD in all my systems. I format them in FAT32 so I can have complete access to every file ...
Summary: ROFL......ain't that the truth. I used to do my own wrenching on my vehicles until I bought one newer than 1985. Jam.........^5 bro.........used to r...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
