Summary: I need my Windows server to access the network by static Ip address how to set that on TCP/IP prorties I have 192.165.110.2 255.255.255.0 192.165.11...
Summary: I have been asked to help a friend with a small network and have a few questions. I have not configured a widows network since NT 4.0 was king. I hav...
Summary: Hi all. I posted this in another forum a while ago and was wondering if anyone could help me on the matter. It's pretty long so please bear with me......
Summary: I have set up a new 2003 server r 2, with terminal sevices, Sql server and Citrix presentnation server 4.5. My problem is that an IP address (from a C...
Summary: Recently purchased Server 2003 standard to install on a small business layout 12 machines. After hearing from several forums how easy the install wiz...
Summary: i have a client that has 2 offices in 2 different locations (2 hour drive apart). he is migrating to a new software system for his practice(dental pra...
Summary: We have recently installed DSL in the office, with all clients including the server picking up an IP address from DHCP on the DSL router. I need to s...
Summary: First, you need a Static IP Address for your mail server, 2nd you need to allow port 25 through your firewall. 3rd in the DNS registry with uk2.net yo...
Summary: Assuming that you have configured your server to run IIS and that you have loaded a default Web site, the rest is strictly DNS related. Employ an ISP...
Summary: First, you're probably going to need a static IP address. It would also help to have a domain name too. You should definately have a firewall and anti...
Summary: I volunteer network admin for a combined school and church network. We have installed a SonicWall switch which does the content filtering and virus pr...
Summary: Hello guys I have an issue, same issue both 2 DL380 G5 - Dual port Embedded NIC Cards. NIC joins point to point and tested with Network too - I go to ...
Summary: Hi to the forum, I have been trying to sort this problem out on and off for 3 years without much luck….hope someone can help me out. I run a windows...
Summary: We switched over to TeamWifi (www.teamwifi.net) and the tech guy said our new IP address would be 10.1.16.30. Do I need more than that IP address? Ou...
Summary: to set up my network address translation after installing windows 2003 server all i did was connect to the internet then went to configure my server t...
Summary: I always use ris to deploy os. But after ris setup, the ip address of the client will be dhcp. Are there anyway to assign the static ip address to the...
Summary: Curt R, Thank you for your reply. So I guess my IP configuration is current since I am setting the static IP address and DNS address as 192.145.15.10...
Summary: I think I have solved the issue with it. I just did WINSOCKXPFIX. Seems to be working fine after that. But I will watch it for sometime before I affir...
Summary: Is the ROUTE of my server OK? I have a working Windows Server 2003 but it is slow with filetransfer. Its most probably a DNSproblem, I am already busy...
Summary: Hi All: I am new in this networking business. I am trying to setup a small office network. I have got all the required gear. There is one server and 4...
Summary: I have a small Server 2003 network with about 12 nodes. My IP addresses have been set up as static. Somehow when I ping 4 of these addresses from the ...
Summary: Curt R Thank you, that sounds so helpful. If I understood right, here is what I did. Changed the DC Servers DNS from 127.0.0.1 to the DC Servers IP Ad...
Summary: Ok I’m going to try to give as much info as possible and hope someone can help me. I set up an FTP site on a server (Windows 2003) using the IIS M...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
