Summary: hey all, one sata hard drive has been working perfectly for a year or two. one day when i tried to open it, it hangs xp for a long time and then gave ...
Summary: How's everyone doing, great? That's super. Alright here's the situation. I bought my first SATA drive (Seagate 320G) sometime around early 2007 and w...
Summary: Sorry this message will most likely be long, but I hope someone can help me. I have just put this system together and would like to install Windows M...
Summary: I recently purchased a Soltek SL-K890Pro-939 Via K8T890 Chipset. I installed a SATA drive directly to the mainboard and Windows wont detect the drive ...
Summary: Jumpers on the SATA drives dont exist. All is contolled throught the bios and the SATA conectors are marked 0 and 1. I presume that the bios settings ...
Summary: Hi All, Need to slave a sata drive to retrieve OLD data...'the drive is faulty', read up that you can just connect an ide cable to the cdrom dr...
Summary: i installed a sata drive last week.. i was having sluggish performance so i decided it was about time to format and start new. everything booted up fi...
Summary: The SATA drives will show as SCSI drives if you have an Intel ICH5-R and you load the Intel RAID drivers by pressing F6 during Windows install. These ...
Summary: Hard drive - Western Digital 200GB SATA Mobo - Asus KV8 SE Deluxe I am trying to install windows XP on a WD 200GB SATA drive. I do not want to use RA...
Summary: I installed a SIIG SATA controller card, and attatched a new SATA drive to it. Well, I don't see the drive anywhere in the Computer Management/Local s...
Summary: also...i should say that i have had to do this even with just one SATA drive Abit NF7-s 2500+ @ 3200+ 512 Corsair XMS PC3200 128 meg Radeon 9800 Pro D...
Summary: Hi all, I'm hoping for a quick answer to 2 quick questions. 1. I am going to buy a SATA hard drive for my MB. To install these drives is it as si...
Summary: My computer currently has two IDE type ATA hard drives and one SATA/150 hard drive. The read speed of the SATA drive is extremely slow. When I burn ...
Summary: Though I'm not familiar with that specific board......on my Asus you have to connect one sata drive to the master (sata1) and the other to the slave (...
Summary: Hello, I'm having no luck at all getting my raid 0 set up much less my sata drives, i have an asus p5gdc board with 1gb of ddr2 ram. I have 2 maxtor 1...
Summary: SATA is pretty flakey with Asus boards. Check the Asus support site as they have numerous posts about this including some SATA drives that simply will...
Summary: Right i have two sata drives in my pc i want to run on sata0 (raid). But when i try to install os on to them it cannot detect any drives. I have creat...
Summary: Hi all, I'm thinking about installing a couple of SATA drives in a new computer to get the RAID advantage. I've heard rumors that SATA drives don't g...
Summary: I'm going to buy a new sata drive soon and was wondering if I needed to install the sata driver during the XP installation or should I install XP then...
Summary: Hi hope someone can help with this problem. I have just build a new system with a Maxtor DiamondMax 10 200 gig SATA drive. The problem is that the sys...
Summary: How do I partitio or format a new WD sata drive? It doesn't show up in explorer...need software to do this in eigther windows or in dos. Thanks. ...
Summary: My board has two slots for normal ATA hard drives and 2 more slots for serial ATA hard drives. Right now I am using to ATA hard drives. I was wonderin...
Summary: Hi, I am looking for an adapter that will allow me to use my SATA (laptop) harddrive with my IDE (desktop) motherboard. Any suggestions ? But here's m...
Summary: I bought a SATA WD 500Gig drive and Ext enclosure to use for more storage for my Dish network DVR. I started having trouble 5 mins after starting to u...
Summary: Hello, managed to figure out about the raid bios in my other post. However, having another problem. For some reason when I enter nvidia raid bios, the...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
