Summary: now have 3 computers hooked up to internet on dialup using ICS. want to upgrade to cable internet serrvice and get a router. question I have is: using...
Summary: Hi all folks, I am planning using Linksys 2.4GHz EtherFast Wireless Access Point and Cable/DSL router with 4-port switch (Model BEFW11S4) to connect ...
Summary: I want to network two PC's together, running Windows 98. I currently have a cable modem. I want to be able to share resources from both computers (i...
Summary: You will need a little piece of kit able to establish a DSL connection, and route IP traffic from your LAN to the WAN. (A DSL router, should be <100US...
Summary: Hi, my question is, if i have a router (d-link di-514) and from the router i have a two hubs (one from port 1 and the other from port 2, because of c...
Summary: Hi all, I should be getting broadband soon (ADSL), but I've got a slight problem with putting my PCs in a subnet... if they're anything other than 192...
Summary: okey doke. question: would that work even if the working computer isnt able to connect to the internet through the router tho? I'd save my life on a...
Summary: Here is my question. My ISP recently found out that I have two computer hooked up through a hub to the same cable modem, thus producing 2 IP address. ...
Summary: I am wanting to find the cheapest route to getting a cisco router up at home. Currently I have a DSL modem and would like to put a router behind that....
Summary: This is really two questions. 1) How do you setup a cisco router for voice and video? 2) How do you setup a cisco router for multiplexing? I have tota...
Summary: I have 4 networks. 1 DSL connection. 1 4 port linksys DSL Router Goal: Share the internet connection with all the networks and keep them all sepera...
Summary: my question is - today i bought a router so i can hook up my other computer , so the grand children are not using my new one, but i just noticed that...
Summary: We have a T1 connection at work shared through a TCP/IP switch. I assign static internal IPS to all the machines. There are a couple of machines tha...
Summary: I have my T1 router set with a WAN ip address (one of a block of ips given by my isp), then I have my lan ip address set to 192.168.52.1. My network ...
Summary: I have a lynksys WAG54G ADSL modem/router with one wired pc connected, one wireless pc and 2 wireless laptops. I have setup to all work lovely, but I ...
Summary: I am connecting three seperate networks together to share the internet. I have a DSL line that I am goig to put a Linksys DSL router on. I do not wa...
Summary: Really basic question - I have ordered a new laptop that has 802.11n capability, does this mean that I need a 802.11n router or will my existing Netge...
Summary: Hello, this is a general question about how routers rout messages from the WAN to LAN side. I have a 2 PCs connected to my ISP through a router. The r...
Summary: Hey I was wondering, can the wireless part of a wireless router be disabled while using the 4 ports that are in the back of the belkin router with the...
Summary: I have VNC setup in one of my store computers, it runs through a router, I have the router setup to port forward the address 192.168.1.101. Every once...
Summary: I have a cisco 806 router. I also have a desktop and a laptop and would like to connect them to our home network. My friend told me to disconnect the ...
Summary: i have two pcs connected to a router and cable internet connect to the router. so both pcs get internet. is there a way to allow one computer(primary ...
Summary: Hello, I'm not too bright when it comes to computers. All of the rooms in my house are prewired for high speed internet, but as of now, I only have o...
Summary: Hi Guys, I have a network using a 4 port Linksys (wired) BEFS41 Router with 4 PCs hooked up.All PCs access the internet and see each other. I would li...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
