Summary: hay, please forgive my VERY late reply but ive been extreamly busy and not had the time to sit down n play with things to try and find a solution. my ...
Summary: Yeah. It's under the 'View' tab, click on 'Capture Text'. You will be prompted for a location to save to. The print from Word or Notepad later on. Is ...
Summary: hi I have Apache2 set up behind a router and no one outside my LAN can access it. forwarding to port 80 fixed the problem where no one could view it ...
Summary: I am trying to set-up an FTP server on one of the PC’s and have tried to configure the router so that incoming FTP traffic is directed to my PC that’s...
Summary: Do you change your cisco router config often? Once you finish configuring your Cisco router, you just need to do a wr net and write it to your tftp s...
Summary: okay, the image i tried to post as an aid didnt come up. basically, i want to config the eth1 on the router to be the DHCP input; workstation, wii, ap...
Summary: I bought a wireless router with this in mind. However, I've not been able to get it to work. My wired router is 192.168.5.1/255.255.255.0 with a subne...
Summary: I have a Polycomm router hosting a T1 connection now and I'm trying to connect a Cisco 1601 in place of the Ploycomm with very little success. The Po...
Summary: I have 2 ips with road runner. Hub connected to modem. From hub 1 ip goes to wife's personal computer. 2d ip goes to my office. In office have 2 D...
Summary: It depends on what you're trying to achieve. You want to PPTP VPN to a server inside your network so the question is why? 1.) if you want connect to y...
Summary: I'm looking to route some computers together so they share internet connections, and i just need to know where to plug a wire at. My xp is connected t...
Summary: Hope this helps. I was also having trouble getting to the config screen using IE ver 6. I have the same type of router as well. Try this... Go to Tool...
Summary: Have you tried clearing the router and reconfigure from scratch? Here are some high points to think about. 1. is your ip from the ISP static or dynami...
Summary: I bought a wireless router with this in mind. However, I've not been able to get it to work. My wired router is 192.168.5.1/255.255.255.0 with a subn...
Summary: Hi all, I have searched on the net and this forum for this, and had no luck finding any answers, sorry if it's already been addressed. Ok here's my ...
Summary: linksys routers are easily configured to forward incoming tcp/ip connections to whichever computer on your LAN. go into your router config util and c...
Summary: Hi I Installed A Sparkcom Router To Link Up Two Pc's In One Room. Both Pc's Use Windows Me. I Managed To Configure The Router To Aol And Get Both Pc's...
Summary: I have a Linksys BEFSR41 4 port cable/dsl router that I transferred to my work office since I upgraded at home. My corporate network is Novell Netwar...
Summary: Hi, I have DSL modem(5100) from SBC/Yahoo. Works great with 1 system. Now I have a Laptop(XP) to go with my Desktop(2000), and hopefully down the road...
Summary: You don't have to change the IP on your Operating SYstem. Change it to "obtain the Ip automatically", and the same with the DNS settings, and everyth...
Summary: Port Mapping, otherwise known as a virtual server in the routers config you simply enter the associated port and the IP of the comp the request should...
Summary: i am behing a 1 port linsys router, along with two other computers. I am using msn messanger and occassional would like to send files to poeple over i...
Summary: I am a beginner at router config, and am at loss. I recently tried a simulator (r1r2.com) I figured out how to get around some, but nobody seems to ...
Summary: now for wireless g troubles that are not my own: my aunt's wireless g router will not communicate with her cable modem. the modem works fine because i...
Summary: Ok.. I have one for you. I have a Linksys Wireless Router (also doing DHCP) and I want to install a second wireless access point outside the original...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
