Summary: Dear Sir, I have to wired up RJ45 connectors to one side of the cable and I/O to the other side, but I dont know exactly the colour scheme. The RJ45 ...
Summary: I just realized that when I asked Radio Shack for rj45 connectors they gave me "Modular Plug cat5e compatible". I am not using cat5e, but I am using c...
Summary: Hi all, I am doing some wiring in an older building and the only place to run an ethernet cable was through a hole which has a thick black industrial ...
Summary: Can I wire a cat5 keystone jack end to a rj45 connector end on one cable? If so, how do I wire the cables? (color) Or do I need to keystone jack each ...
Summary: I want to make a network cable. I think what I need to do is to put RJ45 connectors onto each end of a CAT 5E cable. Is this right? Will it work? Is t...
Summary: I'm not sure what you're looking at but in every instance of DSL I've used at home, and dealt with in an office or place of business, the DSL comes in...
Summary: if u want full dulex u have to change your RJ45 connector combination u can take standard combination than its work othere wise its not show link ...
Summary: Hi, I have recently obtained a stock checking machine form Index the catalogue shop in the UK, it is similar to the argos machine. I would like to ...
Summary: Hi, >> does this nat server have available network ports There's no modem at all. The cable at my place is terminated with a RJ45 connector that plugs...
Summary: Ok, thanks for all your help, I just wanted to connect this device to the PC, it has an RJ45 connector on it and I have connected it to the switch but...
Summary: I've got 3 comps including this one with XP(SP 2) and 98SE(without any updates) on the other two.XP is connected to cable internet.So I've got 2 NIC ...
Summary: My family and I have moved into a new 3 floor house, and for accouple months, I have been wiring the house to make sure the internet would be ready to...
Summary: Good morning guys, I'm trying to make a 10baseT connection outta a cat5 cable and rj45 connectors. What is the color code? Appreciate your time! ...
Summary: well, i've already done the job. It was my first job and I offered to do it for $50.00 plus cost of the cable. I did it practically free because I wan...
Summary: Hi. I have a question about standard copper network cabling. For example, Category 5 is certified for 100 Mhz, and a maximum bandwidth of 100 MBit/s. ...
Summary: Nah, I was only joking before. You need a 5-port hub $30 And 5 10m (30') patch cables with RJ45 connectors on the end. I bought 3 from a local comput...
Summary: first you need a lan card, second you need a ethernet cable and RJ45 connector no need for hub you can setup your ethernet cable using crossover conne...
Summary: I have a broadband modem connected to a router. There is one computer connected from the router, in the same room as the router. I then have a UTP Cat...
Summary: Further to Alarpe's answer, the wires that you need to swap are 1 with 3 and 2 with 6. I too would go to a store and pick one up there. The normal col...
Summary: I have an ehternet port for connection using rj45 connector.There are also no "unknown devices" listed in device manager.Only displays dialup adapter....
Summary: Is cat5e a UTP cable? because ive got a whole lot of unused UTP cables and rj45s. Yes it is. You will need to use rj45 connectors. And does the route...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
