Summary: when i bought a Dell optiplex GS three weeks ago, i had to format drive because i haven't the Windows NT code. I install windows 98 but a lot of drive...
Summary: Obscure Question: On an older Optiplex 433/L system running DOS6.22, Microsoft Word for DOS works fast and scrolls fast. On two newer systems, includ...
Summary: Hello, I have a Dell E1505 and I am trying to get DOS to load USB drivers. I was able to create a DOS boot disk with loading USB drivers by following...
Summary: Hello, I have a Dell E1505 and I am trying to get DOS to load USB drivers. I was able to create a DOS boot disk with loading USB drivers by following...
Summary: I'm attempting to ghost my computer using MSDOS and a ghost disc. To cut this short, right now I'm at the command prompt for DOS under the directory A...
Summary: Here is the result of my tests on TWO DELL OPTIPLEX PC's - one is GX260 (BIOS Rev A05) and the other is an L60 (BIOS Rev A00). Both use the 82801DB/DB...
Summary: Sharky, I am running Windows 2000 and the drive does work properly when I am using that OS. The current machine I am using is a Dell PowerEdge 6650, ...
Summary: I have Windows 95 OSR2 with DOS 7.0 built-in. I need REPLACE.EXE, but it's nowhere in the system, and I wonder how to have such a file working under ...
Summary: Okay here goes, I recently purchased this crappy VINTECH 24x external PCMCIA cdrom. I have a DELL Latitude CP laptop which only has a C: on it, compl...
Summary: I have been going nuts trying to get a CDROM to work on an older Dell OptiPlex GMT 5333 computer that I recently acquired. DOS 6.22 is loaded on the ...
Summary: Dear x86 and JackG, I am not sure that your posts are complete. It is my understanding that the physical connection for a printer may be parallel or s...
Summary: My system ia a DELL Optiplex GX-1, BIOS A03, (Legacy BIOS option is not in Setup, implies A03 is a legacy BIOS) and I am trying to access a GDI TECH U...
Summary: I'm running Windows 98 on quite an old computer (256ram, 330mhz) but that shouldnt make any real difference to my problem. My command.com/DOS prompt i...
Summary: The system is a Dell Optiplex GX110. I got it refurbished from compgeeks.com. I don't recall seeing any BIOS menu selection with options for soundca...
Summary: I have set up a multicast ghost server which works well with the generic Nic drivers that are preloaded into the Boot wizard. Now I need to find a do...
Summary: If you just want your w3.1 to run on the hard drive with DOS 6.22, you MIGHT be able to do it by booting on a 6.22 floppy and doing this: sys c: [ente...
Summary: here's the kicker... command.com on disk one from the dos 6.22 installation disk was physically ruined, and the only HD with DOS 6.22 carries a boot v...
Summary: I have an audio application that requires a Sound Blaster compatible sound card. The application _must_ run in DOS mode (Win95/98's DOS Mode is accep...
Summary: Yes, that can be done via batch file, though it's not a simple, not at all. To get user input, see my FAQ #06 - Get user input. To change the string o...
Summary: i have the full version if you want it you should be able to replace dos with it email me if you want it and ask for instructions if you need em ...
Summary: I am trying to get this system running. The Phoenix bios reports "drive controller failure." So I tried another controller, that didn't work either. A...
Summary: I need a little help with a batch file that I will run from my Windows XP computer. I plan to use this simple PSKill line: pskill -t \\CS1 -u admini...
Summary: I have a dell laptop and i have tried everything i can think of i have pulled the cmos battery but it didn't work what should i do? dell won't give me...
Summary: The program si EMM386.exe, to use this program you must have to file, open your config.sys and type this DEVICE=C:\DOS\EMM386.EXE replace dos director...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
