Summary: Hi, Does anyone happen to know if there is a universal horizontal sync and vertical sync among tv's. I need to know these values plus the refres...
Summary: my monitor wont display at 1024x768 but i have used the res before. it is easy to say that it is a problem with the refresh rate. how do i change the ...
Summary: I have my monitor set to 60 hertz as the refresh rate. It will go to 100 hertz. So how do I know which one it should be on?? Anyone have any ideas? ...
Summary: I read somewhere that you need to have a newer chipset to use simms with a 4K refresh rate. Does anyone know if the SIS 5598 will work with the 4k si...
Summary: Go to Display in Control Panel, then Settings/Advanced/Adapter. Note your refresh rate setting. Best not to change the figure (if any) but you could ...
Summary: I was wondering if all the new Nvidia Drivers after the 43.25..Do they need a higher refresh rate above 75 ....to operate correctly? I have a FX5200 a...
Summary: when you goto the display adapters.. there is one for refresh rate. like 60,65,70.75.80.85.. which one is good. wut actually is the refresh rate for....
Summary: Hello - I was wondering if anyone could tell me what my refresh rate should be set at for optimal performance. I have a geforce4 mx and an envision fl...
Summary: Can anyone tell me, is there any disadvantage of having a very high refresh rate, or can the higher refresj rates only be a good thing? cheers Alex ...
Summary: A monkey climbed tru my window and accidently set refresh rate to 150 on NVidia 4800TI and now Iiyama Vision Master Pro 512 goes black and turns its s...
Summary: Hi all, I just picked up my first laptop. It's a cheap Acer 2300 with integrated Sis graphics. Nothing great but adequate for what I need it for. An...
Summary: I bought a 15" View Sonic monitor at a yard sale last year for $5 (no manual) and used it with my first build. Up to now, I have not given much thoug...
Summary: Hi! My monitor refresh rate max is 60Mhz. However, it has been causing my eyes tiring. Is it ok if i runs it at 70Mhz instead? I wouldn't care how lo...
Summary: I have a Geforce 4600 card and a sony 19 inch monitor. When I use a refresh rate of 75 or 100 all seems ok. I tried 85 and when I do and I go into a...
Summary: I am kinda confused on refresh rates. Can someone tell me what refresh rate I should set my monitor at? Here is a site with it's specs: http://www.vie...
Summary: I have been experiencing this problem. After a few hours of operating normally, the screen starts to blur to the point that I can barely make out the ...
Summary: hi i've got a problem with my refresh rate.... when i go into monitor it says "Default Monitor" and the "properties" box is greyed out.... when i clic...
Summary: Hey i have a monitor and i am running my resolution at 1600X1200, how do i find out what refresh rate is reccomended for it when i dont have the manua...
Summary: Anyone know what happened to the "refresh rate override" tab with the 71.89's? Did nvidia stop including this feature with their drivers altogether, ...
Summary: i'm setting up a pc for my nephew. he use it mainly on gaming. i want to optimise the new system for gaming use. i need some help on configuration bef...
Summary: I have an 17 inch (16 inch viewable)Optiquest Q71 monitor and would like to know what refresh rate and resolution setting would be best. I just change...
Summary: AFAIK the only thing missing from the RefreshForce's Home Page is the warning that it could damage the monitor if the refresh rates exceed those set b...
Summary: Hope someone can help me out here. I was using the Omega Radeon drivers to center my image on the screen. After a couple of adjustments I got dead pi...
Summary: Hi I broke a pin on my monitor cable and now the refresh rate is stuck at 60hz. Does anyone know a way to make the slow refresh rate a little less no...
Summary: hello fine folks. heres a very simple question. i was wondering what is the ideal refresh rate for a monitor. ive heard the higher the better but can ...
![[higher confidence]](http://static.computing.net/img/AT-red_x.gif)
- higher confidence, ![[lower confidence]](http://static.computing.net/img/AT-black_x.gif)
- lower confidence
